Bedienungsanleitung Chicco Essential Digital Audio Baby Monitor (Seite 24 von 148) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

500879

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Remove the run out rechargeable battery (13) and

replace with another rechargeable battery that is

identical to the 3.7V 800mAh supplied with the

product (code 20256400100 to be requested

directly from Artsana S.p.A.) taking care to place

them with the correct insertion polarity indicated

on the battery compartment.

Reposition the battery compartment closing

panel (9), first inserting the lower panel hooks in

their battery compartment housing and gently

pushing the panel toward the product (fig.4).

TECHNICAL SPECIFICATIONS

Child unit (primarily in transmitter mode)

Mod. 06607

Power:

Internal: TWO 1.5V AAA/LR03 ALKALINE

BATTERIES

External: via 100-240V~ 50/60Hz /6V

500mA mains switching adapter

Transmission:

• Transmission frequency band: 2400-2454 MHz

• Signal strength: 100mW max

Parent unit (primarily in receiver mode)

Mod. 06607

Power:

Internal: 3.7V 800mAh LITHIUM-ION BATTERY

External: via 100-240V~ 50/60Hz /6V

500mA mains switching adapter

Lithium-ion battery charging via 100-240V ~

50/60Hz /6V 500mA mains switching

adapter

Reception:

• Transmission frequency band: 2400-2454 MHz

• Signal strength: 100mW max

Mains adapter

Mod. S003IV0600050

INPUT: 100-240V ~ 50/60Hz 150mA

OUTPUT: 6V 500mA

Plug polarity:

Made in China

Lithium-ion battery

Mod. MB1022 (ICP46/34/46)

Nominal capacity: 800mAh (2.96Wh)

Nominal voltage: 3.7V

Lithium batteries give best performance when

used at normal room temperature (20°C±5°C)

Made in China

SYMBOLS KEY

monophase alternate current

direct current

for indoor use only

Class II -

double insulation equipment

Conforms to applicable EC

directives and subsequent

amendments

ATTENTION. Read the instructions

for use

TROUBLESHOOTING

If you experience problems, please first check the following list and check that:

• Both units are on

• Both units are properly connected to the power socket via the mains adapter (1), or that batteries are

charged.

FAULT CAUSE SOLUTION

The parent

unit (receiver)/

child unit

(transmitter)

power

and link

indicator

light (5)

is off

- Child unit (transmitter) and/or

parent unit (receiver) off.

- Child unit Alkaline batteries

(not included) and/or parent unit

lithium-ion battery completely

discharged.

- Mains adapter disconnected or

not connected correctly.

- No mains voltage.

- Switch on the child unit (transmitter)

and/or the parent unit (receiver)

- Replace Alkaline batteries

in the child unit and/or charge

rechargeable lithium-ion battery in the

parent unit

- If the units are powered via mains

adapter, verify that this device is

correctly connected to a mains outlet

- Check that the outlet is being

powered.

The parent unit

(receiver) does

not emit any

sounds.

- No discernible sounds are arriving

to the child unit (transmitter)

- The voice activation function has

been selected

- Parent unit (receiver) volume set

at minimum

- Child unit Alkaline batteries and/

or parent unit lithium-ion battery

completely

discharged

- The parent unit (receiver) may

be off

- Just as soon as discernible sounds

from the environment are present,

the transmitter will be activated.

In any case, for peace of mind, test

transmission with the help of another

person who can try to speak in the

room the child unit (transmitter) is on.

- Check the position of the voice

activation or continuous transmission

ON/OFF selector.

If the selector is set to ON, the voice

activation function is active.

As soon as sounds present in the child

unit environment exceed the threshold

for voice activation, the parent unit will

emit sounds.

- Adjust parent unit (receiver) volume

until sounds are audible, pressing

the + volume adjustment button (3a).

- Replace Alkaline batteries

in the child unit and/or charge lithium-

ion battery in the parent unit

- Switch on the parent unit (receiver)

Interference In rare cases, even if FHSS

technology ensures high immunity

to interference

from analogue devices,

interference can be caused by

the presence of another intercom

or similar transmission device

switched on nearby.

Electromagnetic pollution

(proximity to antennas with radio

transmitters, high

voltage cables, etc.).

Move away from analogue equipment

and/or leave

the area in which it is located.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chicco Essential Digital Audio Baby Monitor Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info