Bedienungsanleitung Chicco Humi Ambient (Seite 33 von 124) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

767925

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

which the device is used. The harder the

water and the more often the device is used,

UIFRVJDLFSEFQPTJUTFODSVTUBUJPOTXJMMGPSN

leading to a reduction in performances, an

increase in noise and the device being un-

able to run normally. It is therefore recom-

mended to clean and decalcify at least once

a week as follows:

t8"3/*/( Before proceeding in perform-

ing any cleaning or maintenance proce-

dures on the device, make sure that the

power cable (5) is unplugged from the

mains socket and that the device and its

components have cooled down completely.

r4JODF UIF EFWJDF DPOUBJOT XBUFS XIJDI

could leak out during the operations de-

scribed below), these must always be per-

formed on suitable surfaces that are not

sensitive to water and dampness.

1. Remove the lid (8) from the water tank (2)

WARNING: when the humidier is run-

ning, water is condensed in the lid (8), and

when this is removed, trickles of conden-

sation could leak out and wet the surfaces

around the device.

2. Remove the water tank (2) by lifting it verti-

cally using the handle provided (15). (Fig. D)

3. Slightly move the steam duct lock (17) (Fig.

E) and remove the duct by carefully lifting

it up, rinse it and remove the limescale res-

idues with a cloth, also using a tool if neces-

sary. Carefully rinse and dry with a soft cloth.

4. Empty out the residues of water in the

heating tank (13) by tilting the technical

base in the direction indicated by the ar-

rows (a) on the same as indicated in gure

F, taking care not to wet the plug and the

power cable (5) or allow the water to enter

the air duct (16).

5. Pour approximately 250 ml of water into the

heating tank (13) and repeat the operation

described in point 4 twice.

6. Remove any residues remaining in the

heating tank with a cloth (13) using a small

tool to remove the limescale in the water

inlet channel (Fig. H), repeat the operations

indicated at point 5. and dry carefully.

7. Unscrew the cap of the water tank (14),

empty the water residues contained in the

water tank (2) then ll it completely with

cold drinkable tap water.

8. Rinse a few times and dry carefully.

1PVSBCPVUMJUSFPGBTPMVUJPOXJUIFRVBM

parts of water and white wine vinegar into

the water tank (2).

10. Screw the cap back on to the water tank

(14) and shake it for about a minute, put

the steam duct (4) down into the bottom

of the heating tank (13) ensuring that the

ballcock structure (9), is correctly inserted

on to the cylinder present inside the tech-

nical base (6). (Fig. G).

11. Insert the water tank (2) on to the techni-

cal base (6) and let it rest there for at least

4 hours or, better still, overnight if possible.

12. Repeat the operations from points 2 to 8.

13. Put the steam duct (4) down into the

bottom of the heating tank (13) ensuring

that the ballcock structure (9), is correctly

inserted on to the cylinder present inside

the technical base (6).

14. If you wish to use the device again, ll the

tank (2) full with cold drinkable tap water

and screw the cap tightly on to the heat-

ing tank (14), lift the tank using the handle

provided (15) and insert it, keeping it in a

vertical position, on to the technical base

(6), carefully rinse and dry the cap (8) and

place it on the tank.

15. The device is now ready to be used again

16. Instead, if the device is not to be used

again, carefully dry the inside of the tank

(2) with a soft cloth, screw the water tank

cap on (14) leaving it very loose to reduce

the possibility of odours forming therein,

and insert it on to the technical base (6).

17. Carefully rinse and dry the cap (8) and

place it on the tank.

18. Put the device back in a cool, dry, clean

place away from direct sunlight.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chicco Humi Ambient Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Chicco Humi Ambient

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info