Bedienungsanleitung Chicco Isofix Base voor Auto Fix Fast (Seite 15 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

500768

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

To remove the child car seat

from the base:

Return the handgrip to the vertical

position (B) (Diag. 15) and release the

child car seat by pulling the release le-

ver whilst using the handgrip to lift it

upwards (Diag. 22).

Removing the base

Repeat the above process in the reverse

order.

Press the adjuster lever (L) on the sup-

port foot and shorten it all the way to

the end.

Lift the ISOFIX adjuster lever and pull

the base away from the backrest as far

as possible

Press the release buttons (H) to release

the ISOFIX connectors

Take the protective caps previously hid-

den away in the compartment and re-

place them on the ISOFIX connectors.

Push the ISOFIX system inside the base

as far as it will go.

INSTALLING AND REMOVAL

WITH VEHICLE 3-POINT SAFE-

TY BELT

Installation

1. Position the base on the chosen vehicle

seat, position it so that it touches the

vehicle seat backrest (Diag. 16).

2. Position the support foot (E) and use

the adjuster lever to ﬁx it in place (L)

(Fig. 17).

3. Check the indicators (M and N) on

the foot to ensure it is ﬁtted correctly.

When you can see the green indicator

(N), this means you have installed it

properly.

4. Pull the vehicle safety belt and con-

nect it to the relative buckle, threading

the horizontal abdominal belt through

the two slots (B) highlighted in blue

(Diag. 18).

5. Attach the child car seat onto the base

(in a rear-facing position) and push it

downwards until you hear it click into

place (Diag. 19).

6. The indicator on the side (D) will turn

green (Diag. 20) when the child car

seat is securely and correctly locked

on place.

7. Check that the child car seat is cor-

rectly ﬁtted to the base by trying to

lift the front and rear sections.

8. Pull the diagonal car safety belt and

thread it through the relative slot,

highlighted in blue, on the back of the

child car seat backrest (Diag. 22)

9. Pull the belt as tight as possible

around the child car seat, without

leaving any slack and making sure it

is not twisted.

10. Turn the child car seat handlebar as

far as possible (B) against the vehicle

seat backrest (Diag. 21).

WARNING: NEVER INSERT THE

CAR SAFETY BELT IN ANY PO-

SITION OTHER THAN THOSE

INDICATED IN DIAGRAM 22.

To remove the child car seat

from the base:

free the diagonal safety belt from the

slot on the backrest, return the handle-

bar to the vertical position (A) (Diag. 21)

and release the child car seat by pulling

the relative lever whilst using the hand-

grip to lift it upwards (Diag. 23).

WARNING! After installing the child

car seat, ALWAYS check that the ve-

hicle safety belt is tightened properly

and the buckle clasps do not push the

belt out of the belt slot on the base and

does not interfere with the belt slots

themselves.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chicco Isofix Base voor Auto Fix Fast Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info