Bedienungsanleitung Chicco Walky Talky (Seite 11 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

767931

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

• WARNING: Do not use the prod-

uct if some of its parts are dam-

aged, torn or missing.

• WARNING: This baby walker

should be used only for short peri-

ods of time (e.g., 20 min).

• WARNING: This baby walker is in-

tended to be used by children who

can sit unaided, approximately from

6 months. It is not intended for chil-

dren weighing more than 12 kg.

• WARNING: Do not use replacement

parts other than those approved by

the manufacturer or distributor.

• WARNING: Before use, ensure that

all the safety devices are tted and

working correctly.

• WARNING: Keep your child away

from all moving parts whilst you

adjust the baby walker.

• The baby walker is not suitable for

children over 85 cm in height.

• To avoid all risks of strangulation,

never give children objects with

cords or strings attached, or leave

them near such objects. Watch out

for curtain and blind cords, etc.

• The baby walker is not designed

to be used when feeding a child;

do not use when feeding to avoid

damages or malfunctions of electri-

cal parts due to contact with food.

• Keep all plastic bags and small toys

away from children to prevent the

risk of suocation.

• Never leave the product exposed

to bad weather or direct sunlight.

If the baby walker is left exposed to

direct sunlight for a long time, al-

low it to cool down before let your

child use it.

• Prolonged exposure to sunlight

can cause fading in fabric and ma-

terials colours.

• Do not use this product with tem-

perature below 5 °C or on slippery

and/or icy surfaces.

• Do not use this product as a sledge

or raft in the water.

• Check the baby walker regularly for

signs of wear and damage.

• Always check that the stoppers are

tted correctly and show no sign of

damage or tear.

• Do not allow other children to climb

onto or play without the supervision

of an adult near the baby walker.

• When not in use, store the baby

walker in a suitable place, away

from contact with all weather con-

ditions and out of the reach of chil-

dren.

CLEANING & MAINTENANCE

The cleaning and maintenance operations must only be

carried out by an adult.

Clean the fabric and plastic parts including the stopper

with a damp cloth.

Do not use solvents or abrasive products for cleaning.

Dry the metal parts to prevent the formation of rust.

PADDED SEAT COMPOSITION:

100% polyester outer layer, 100% polyurethane inner layer

Wash by hand in cold water

Do not bleach

Do not tumble dry

Do not iron

Do not dry clean

COMPONENTS/PARTS

A) Structure of the baby walker

B) Upholstered padded seat

C) Rigid spoiler

D) 2 front swivel wheels

E) 2 rear xed wheels

F) 6 stoppers

G) Electronic toy panel

H) Padded seat xing bands

I) Bar support

FIRST ASSEMBLY OF THE BABY WALKER

1. Turn over the structure (A) of the baby walker. Attach the

front wheels (D) in their slots as shown in gure 1. Make

sure the wheel pin has come to its limit.

2. Attach the rear wheels (E) in their slots as shown in gure

2. Make sure the pin has come to its limit: a click will be

heard and the fastening pin will appear from the hole.

3. Secure all the stoppers (F) in their slots as shown in gure

3. Make sure that the pins of all the stoppers have come to

their limit.

4. Bring the baby walker to position for use by turning the

wheels to the oor (levelled and horizontal); slowly lift the

upper part of the structure as shown in gure 4, by pulling

it upwards until it clicks into place in the desired position.

WARNING: Before putting the child in the baby walker,

make sure the knob located below the upper part of the

structure has reached its engagement position: a click will

be heard to indicate it is locked (g. 4a). Then push down

the structure to ensure the proper engagement.

5. Insert the front tabs of the rigid spoiler (C) into the slots

cut on the upper part of the structure (A) and push down

on the back until a click is heard locking them (g. 5).

WARNING: Once the spoiler is inserted it’s no longer possi-

ble to pull it out. Do not try to remove it with a screwdriver

or other tool.

6. Insert the padded seat plastic rings (B) in the slots

formed along the top edge of the baby walker (g. 6) and

make sure they are properly locked in the shown position

(g. 7-8).

7. The electronic toy panel with sounds and lights can be

placed on the upper part of the structure with a simple

pressure (g. 9); It does not require any type of xing. Bat-

teries not included; the toy has two holes located under it

to allow to x the toy on dierent parts of the baby walker,

through the included xing bands (g. 10).

WARNING: To prevent the risk of suocation, the electron-

ic toy panel must be xed to other parts using only items

included (xing bands), do not add laces.

WARNING: When the toy is not xed to other parts keep

the bands out of reach of children; do not place the toy on

the baby walker with the xing bands mounted.

WARNING: The bar support must be installed by the par-

ent before allowing the baby to use the walker.

8. The bar support (I) with movable toys is installed by in-

serting side intersections in their seats on the top of the

structure, pushing down until they click (g. 11-12).

HEIGHT REGULATION OF THE BABY WALKER

WARNING: When opening, closing or regulating the baby

walker, make sure that your child is at a safe distance.

9. To open the baby walker slowly lift the upper part of the

structure by pulling it upwards and supporting it from be-

low until it clicks into the desired position (g. 4).

10. To adjust the seat height, after taking the child from the

baby walker, push the upper part of the structure upwards

until it clicks into its locked position. To lower the height

move the knob located below the upper part of the struc-

ture and turn it counter-clockwise (g. 13), push the knob

up, accompany the upper part to the desired position (g.

14). Upon release of the pin, the structure is automatically

locked. The height can be adjusted to three dierent po-

sitions.

WARNING: Before putting the child in the baby walk-

Chicco Walky Talky Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info