Bedienungsanleitung Christopeit AM5 - 1126 (Seite 17 von 44) (Deutsch, Englisch, Holländisch, Französisch)

644075

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

English

Step 5:

Installation of pedal support cover (34+49) and handle cover (16+18)

and handlebar support cover (27).

1. Mount front pedal support cover set (34L+34R) to both side front end

of pedal support (41) and secure with screws (29+55) for each side.

2. Mount foot pedal cover set (49) to both side rear end of pedal support

(41) and secure with screw (48) each side at pedal support holder (47).

3. Mount handlebar cover set (27-1+27-2) to the handle bar support (15)

and secure with screws (57).

4. Mount left connection tube cover set (18-1+18-2) to left connection tube

(24) and secure with screws (57).

5. Mount right connection tube cover set (16-1+16-2) to right connection

tube (24) and secure with screws (57).

Step 6:

Checks

1. Check the correct installation and function of all screwed and plug

connections.

Installation is thereby complete.

2. When everything is in order, familiarise yourself with the machine at a

low resistance setting and make your individual adjustments.

Note:

Please keep the tool set and the instructions in a safe place as these may

be required for repairs or spare parts orders becoming necessary later.

Mount, Use & Dismount

Transportation of Equipment:

There are two rollers equipped on the front foot. For moving, you can lift

up the rear foot and drive it to where you would like to locate or store it.

(Attention: If this item hasn’t got a ﬁxed handlebar, please use carefully the

left and right arms for procedure.)

Mount, Use & Dismount

Mount:

a. Stand beside the item, put the nearest footrest into deepest position

and hold the ﬁxed handlebar tightly.

b. Put your foot onto the footrest, try to put whole body weight on your

foot and simultaneously cross over

with your another foot on the other side footrest and place there on

the footrest too.

c. Now you are in the position to start your training.

Use:

a. Keep your hands in desired position on the ﬁxed handlebar.

b. Pedal your exercise item by step your feet on footrests and balance

the body weight to left and right side of footrest

c. If you like to exercise the upper body too, you can place the hands

from ﬁxed handle bar to the left and right handle grips.

d. Then you can increase the pedaling speed gradually and adjust braking

resistance levels to increase the exercise intension.

e. Keep always your hands on ﬁxed handle bar or hand grips left and

right.

Dismount:

a. Slow down the pedaling speed until it comes to rest.

b. Keep the hands grabbing the ﬁxed handlebar tightly, put one foot cross

over the equipment and land on the ﬂoor, then

land the other one.

This training equipment is a stationary exercise machine used to simulate

a combination of biking, stepping and walking without

causing excessive pressure to the joints, hence decreasing the risk of

impact injuries.

Exercise this item offer a non-impact cardiovascular workout that can vary

from light to high intensity based on the resistance preference set by the

user. It will strengthen your muscles of upper and lower body and increase

cardio capacity and maintain ﬁtness of your body also.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit AM5 - 1126 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info