Bedienungsanleitung Christopeit Runner Pro Magnetic - 9829 (Seite 16 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

663906

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

5858

Step 7:

Checks

1. Check the correct installation and function of all screwed and plug

connections.

2. When everything is in order, familiarise yourself with the machine at a

low resistance setting.

Note:

Please keep the tool set and the instructions in a safe place as these may

be required for repairs or spare parts orders becoming necessary later.

Possible faults and their remedies

Most faults which can occur can be rectified by the following, simple

steps.

1. The computer no longer operates correctly

a) Check that all plugged connections are made correctly.

b) Check whether the batteries still have sufficient capacity/power.

2. The belt (2) no longer runs evenly

To achieve even running and to reduce the friction between the belt (2)

and the board (34), you should apply a silicone-based lubricant

occasionally on the slip surface beneath the belt (2). Ensure that the

lubricant is not based on an oil or petroleum compound.

3. The belt (2) no longer runs centrally or slides

a) If the belt (2) has run to the left of the direction of running, turn the left

screw (58) clockwise and the right screw (58) anticlockwise by a

quarter of a revolution each. Run briefly on the belt.

If the belt still does not run centrally, repeat the above procedure.

b) If the belt (2) has run to the right of the direction of running, turn the

left screw (58) anticlockwise and the right screw (58) clockwise by a

quarter of a revolution each. Run briefly on the belt. If the belt still does

not run centrally, repeat the above procedure.

c) If the belt (2) slips, turn both screws (58) clockwise by a quarter of

a revolution. Run briefly on the belt. If the belt (2) still slips, repeat the

above procedure.

Instruction for a mechanical treadmill, slowed down magnetically.

Settle the treadmill on an even ground and lock it with the handgrip

screw (Abb. 10) for the training start.

And also lock it with the round handgrip screw (Abb. 30) for the fold up

condition as mentioned in the instructions (step 6)

The stability of the piece of apparatus is not to be endangered by putting

something under the treadmill

like a piece of wood or something similar. Guarantee before starting the

training that treadmill is not loaded

higher than with the maximum permissible weight of body and that there

is enough space for security of 2 000 mm x 1 000 mm.

Run in the middle of the running surface, hold yourself tight and don’t

step on the slip board (31) or on the foot mats (Abb. 34). Only run in

increasing with look at the Computer on the treadmill.

during the running. In emergency step of the treadmill lateral and hold on

to the handle (Abb. 6+7) When nobody is on the

treadmill it will stop automatically .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit Runner Pro Magnetic - 9829 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info