Bedienungsanleitung Christopeit CL2 (Seite 22 von 65) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

793198

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Battery compartment

AAA batteries

Computer instructions

The supplied computer allows the most convenient training. Every value

relevant to training is displayed in a window.

From the beginning of the training session, the required time, the current

speed, the approximate calorie consumption, the travelled distance ad the

current pulse rate are displayed. All values are counted from zero upwards.

If you wish to see one value displayed constantly as well as the speed during

training, select this with the „F“ key. If you wish to see these values in constant

alternation, select the „SCAN“ function. The display then changes from one

function to the next at intervals of approx. 4 seconds.

The computer is switched on by briey pressing the F- key or simply by

beginning training. The computer begins to register and display all values.

To stop the computer, just stop training. The computer stops all measurements

and retains the last attained values for 4 minutes. The last attained values in

the functions TIME, CALORIES and KM are stored and training can continue

with these values when training is resumed.

The computer switches of automatically approx. 4 minutes after training is

stopped.

Displays:

1. „SPEED“ (KM/H) display:

The current speed is displayed in kilometres per hour. The values last attained

by this function are not stored. (Limit of the display: 99.9 km/h.)

2. „TIME“ (ZEIT) display:

The currently required time is displayed in minutes and seconds. The values

last attained by this function are stored. (Limit of the display: 99.59 minutes.)

3. „DIST (KM)“ display:

The current status of the travelled distance is displayed. The values last

attained by this function are stored. (Limit of the display: 999,9 km.)

4. „CALORY“ (CAL) display:

The current status of the consumed calories is displayed. The values last

attained by this function are stored. (Limit of the display: 9999 calories.)

5. „KM TOTAL“ (ODO) display:

The current status of the travelled kilometres of all previous training sessions

including current training session is displayed. The values last attained by

this function are not stored. (Limit of the display: 9999 km.)

6. „PULSE“ display:

The current pulse rate is displayed in beats per minute. The values last

attained by this function are not stored. (Limit of both displays: 40 – 240

pulse beats per minute.)

Note:

For pulse measurement, the two contact surfaces of the pulse measuring

handle unit must be gripped simultaneously. The contact surfaces should

be located centrally in the palms of the hands.

7. „SCAN“ function:

If this function is selected, the current values of all functions are displayed

successively in a constant sequence approx. every 4 seconds.

Keys:

1. „F“ key:

Pressing this key once briey makes it possible to change from one function

to another, i.e. the respective functions can be selected. The currently

selected function is indicated by an icon in the respective window. If the key

is held longer (approx. 3 seconds), all last attained values are deleted with

the exception of the values in the „KM TOTAL“ display.

Battery compartment

AAA batteries

Replacing the batteries:

1. Open the battery compartment cover and then remove the used Batteries.

(If the batteries should leak remove them under increased considering that

the battery acid is not into contact with skin come and clean the battery

compartment thoroughly.)

2. Insert the new batteries (type (AAA) 1.5 V in the correct order and taking

into account the polarity in the battery compartment and close the battery

cover so that it clicks into place.

3. If the computer does not pick up immediately, the function should Batteries

are removed for 10 seconds and re-inserted.

4. The empty batteries properly in accordance with the disposal regulations

disposed of and do not give residual waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit CL2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info