517218
20
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
20
Step 7:
Installation of the right (34) and left (28) footrest on the pedal tubes
(21+24).
1. Push the footrest (34) onto the pedal tube (24) so that the bores in
(34) are aligned with one of the possible installation positions in (24).
(Note. The high lip on the long side of the footrest must point inwards
(towards the main frame (1).)
2. Put one washer (29) on each carriage bolt (30) and push through the
bores from the top and fasten from the bottom with the washers
(31), the spring washers (32) and the knob down (33).
(Note. The position adjusted in this way should always be equal at
both sides. The positions can be changed as desired at all times by
removing the carriage bolts (30) and sliding the footrests on the
footrest brackets.)
3. Install the left footrest (28) with all additionally required parts on
the left hand side of the machine as described in 1. + 2.
Step 8:
Installation of the computer (48) and handle bar cover (50+51) on
the handlebar post (15).
1. Put the ends of the computer cable (14) and pulse cable (40) into the
socket at the backside of the computer (48).
2. Push the computer (48) onto the plate at the upper end of the
handlebar post (15).
(Note: When pushing on the computer, thread the cables in the
bores of the handlebar post (15) so that the cables cannot be
trapped.
3. Put the front and back handlebar cover (50+51) onto the upper end
of handlebar post (15) together and fix them with screws (37+38).
Step 9:
Attach the power
1. Please insert the plug of adaptor (52) to the jack of chain guard.
2. Please insert the adaptor (52) to the jack of wall power.
Step 10:
Checks
1. Check the orderly installation and function of all bolted and plug
connections. Installation is then complete.
2. When everything is in order, familiarise yourself with the machine at
a light resistance setting and make the individual adjustments of the
footrests (28) and (34).
Note: Please keep the tool set, the puller and the instructions carefully
because these may be required later for repairs or spare parts orders.
If you ever remove the covers (10) and (11), observe that these are
attached not only outwardly with the screws (64+65), but also inwardly
at the rear end of the cover with the screws (65).
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

christopeit-el-8---9824

Suche zurücksetzen

  • Fehleranzeige E1
    Ich habe alle Kabel und kabelverbindungen kontrolliert. Es sind keine Defekte zu erkennen. Eingereicht am 2-10-2019 18:06

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Christopeit EL 8 - 9824 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info