585807

Christopeit EMS 6 Seite 24

24
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
24
More about Workout Parameters
QUICK-START-PROGRAM
After power-up, press PROGRAMM -key to enter “SCHNELLSTART” (Quick
Start) -Program. Start pedaling to begin workout at this time. Press “+” or
“–“ -key to adjust resistance load during workout.
MANUAL-PROGRAM
Setting Parameters for Manual
Selecting “MANUELL” (Manual) using PROGRAMM -key then pressing
“F”-key, 1St parameter “ZEIT” (Time) will flash so value can be adjusted
using“+” or “–“ -key.
Press “F”-key to save value & move to next parameter to be adjusted.
Continue through all desired parameters, start pedaling to start workout.
“+” or “–“ -key adjusts resistance load during workout.
USER-Program
User program allows user to create their own program that can be used
immediately and on subsequent workouts.
Create User Profile
Selecting user program with PROGRAMM -key, Press “F”-key to select
“INDIVIDUAL” (USER) mode. The text window will display” Select Profile”
4 seconds , meanwhile Segment 1 will flash. Adjust “+” or “–“-key to set
desired resistance load. Press “F”- key to move to next segment, continue
for all 10 segments.
Setting Parameters for User Program
After that 1st parameter “ZEIT” (Time) will flash so value can be adjusted
using “+” or “–“ - key. Press “F”-key to save value & move to next parameter
to be adjusted. Continue through all desired parameters, start pedaling to
begin workout. The resistance could not be adjusted by “+” or “–“ –key
during workout.
Note: The final 10 segments profile will be saved for future workouts.
INTERVAL-PROGRAM
Selecting ”INTERVALL” (Interval) pressing PROGRAMM -key then pressing
“F”- key. The text window will display “SELECT LEVEL” 3 seconds.
There are 3 levels (L1, L2, L3) to select, using “+” or “–“ -key then pressing
“F”- key to confirm.
Setting Parameters for Interval
After that 1st parameter “Time” will flash so value can be adjusted using
“+” or “–“ -key. Press “F”-key to save value & move to next parameter to be
adjusted. Continue through all desired parameters, start pedaling to start
workout. The resistance could not be adjusted by “+” or “–“ -key during
workout.
WATT-PROGRAM
Selecting “WATT” pressing PROGRAMM –key, then pressing “F”-key.
The text window will display “SELECT WATT” 3 seconds. Meanwhile “100”
will flash. Selecting WATT value from 100W to use “+” or “–“ -key then
pressing “F”-key to confirm.
Setting Parameters for WATT
After that 1st parameter “Time” will flash so value can be adjusted using
“+” or “–“ -key. Press “F”-key to save value & move to next parameter to be
adjusted. Continue through all desired parameters. Start Pedaling to start
Workout, “+” or “–“ -key adjusts WATT value during workout.
HRC-PROGRAM
Setting Parameters for Heart Rate Control
Selecting “ZIELPULS” (HRC) pressing PROGRAMM –key, then pressing
“F”-key. 1St parameter “ZEIT” (Time) will flash so value can be adjusted
using “+” or “–“ -key. Press “F”- key to save value & move to next parameter
to be adjusted. Continue through all desired parameters, start pedaling to
start workout.
If pulse is above or below the set target pulse, computer adjust the
resistance load automatically.
It will check every 10 seconds approx. 1 level will increase or decrease
(Note: each bar represents 2 level of loading)
User can not adjust resistance load, using “+” or “–“ -key during the
workout.
TEST-PROGRAM
Selecting “TEST ” pressing PROGRAMM -key then pressing “F”-key.
The display will show out average speed, total Distance, total Kilojoules and
average Pulse of last workout for 4 seconds. After that the text window will
display “SELECT WATT” 3 seconds, meanwhile “100” will flash.
Selecting WATT value from 100W, using “+” or “– “ -key then pressing
“F”-key to confirm. Start Pedaling to start Workout, Time display will show
12:00, it can not be changed.
After 12 minutes, will display Average Speed, Total Distance, Total Kilojoules
and Average Pulse,
BMI-BMR-FAT-PROGRAM
Setting Data for BMI BMR FAT
Selecting “BMI BMR FETT” pressing PROGRAMM -key then pressing
“F”-key.
The text window will display “SLECT AGE” 3 seconds, meanwhile “30” will
flash so Age can be adjusted using
“+” or “–“ -key, press “F”-key to save value & move to next data.
The text window will display ‘SELECT GENDER” 3 seconds, meanwhile “♀”
of Gender will flash so Gender can be adjusted using “+” or “–“ -key,
press “F”-key to save gender & move to next data.
The text window will display “SELECT WEIGHT” 3 seconds, meanwhile “
70” of Weight will flash so weight can be adjusted to use “+” or “–“ -key,
press “F”-key to save value & move to next data.
The text window will display “SELECT HEIGHT” 3 seconds, meanwhile “
175 “of Height will flash so Height can be adjusted to use “+” or “–“ -key,
press “F”-key to save value
Press “F”- key to start measurement, please also grip hand pulse grips.
After measurement the display will show out Body Fat %, BMI and BMR.
(Body Fat % and BMI will switch display to another in every 4 seconds)
1. BMI (Body Mass Index): BMI is a measure of body fat based on height
and weight that applies to both adult men and women.
2. BMR (Basal Metabolic Rate): Your Basal Metabolic Rate (BMR) shows the
number of calories (1 Calorie = 4,186 Joule) your body needs to operate. This
doesn’t account for any activity, it’s simply the energy needed to sustain a
heartbeat, breathing and normal body temperature. It measures the body
at rest, not sleep, at room temperature.
MOUNTAIN-PROGRAM
Selecting “BERG” (Mountain) pressing PROGRAMM –key then pressing
“F”-key. The text window will display “SELECT LEVEL” 3 seconds.
There are 3 levels (L1, L2, L3) to select, using “+” or “–“ -key then pressing
“F”-key to confirm.
Setting Parameters for Mountain
After that 1st parameter “ZEIT” (Time) will flash so value can be adjusted
using “+” or “–“ -key. Press “F”-key to save value & move to next parameter
to be adjusted. Continue through all desired parameters, start pedaling to
begin workout. The resistance could not be adjusted by “+” or “– “ -key
during workout.
50~350 50/80
… 24 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

christopeit-ems-6

Suche zurücksetzen

  • Ich habe mein Netzteil verloren ich braute ein neues kann man es bei ihnen bestellen Eingereicht am 23-10-2020 19:14

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Christopeit EMS 6 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info