Bedienungsanleitung Christopeit ET 2000 (Seite 23 von 64) (Deutsch, Englisch, Holländisch, Französisch)

793191

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

TIME/ WATT :

Indicates Time or Watt alternately. The time shows minutes and seconds.

If preset, time counts downwards. Minimum preset 5Min. Range 5-99Min.

The actually power display show in Watt. Preset range 30-350Watt only in

Watt program P16.v Or permanently by pressing the F-key.

RPM/SPEED/KMH:

Indicates RPM or Speed alternately. The RPM display shows the cycle

turnings per minute. The speed display show kilometers per hour. Or

permanently by pressing the F-key.

DIST/CAL:

Indicates Distance or Calorie alternately.

The distance display show kilometer. Preset range 1-999km. If preset distance

counts downwards. The calories display shows kcal. Minimum preset 10kcal.

Preset range 10-990. Or permanently by pressing the F-key.

KM Total (ODO):

The distance in km of all training units is displayed. It is not possible to

specify or reset to zero.

PULSE :

Indicates the actually pulse heart rate. The whole set of heart rate detector

include 2 sensors each side. Each sensor has 2 pieces of metal parts. The

correct way to get detected is to gently hold both metal parts each hand.

With the good signals picked up by the computer, the heart mark in the

HEART RATE Display shall ash. Range 60-240bpm. If a pulse upper limit

is specied, the display ashes when the preset value is reached.

TARGET H.R.:

Indicates only one value of TARGET HEART RATE.

LOADING Proles:

There are 10 columns of loading bars, and 8 bars in each column. Each

column represents 1 minute workout (without the change of TIME value),

and each bar represents 3 levels of loading.

Program Graph:

Each graph shown is the prole of the loading in each interval (column). With

the value of TIME counting up, each interval is 3 minute that all the columns

make up 30 minutes. With the value of TIME counting down, each interval is

the value of setup TIME divided by 10. For example, if the time value is setup

to 40 minutes, each interval will be 40 minutes divided by 10 intervals

(40/10=4). Then, each interval will be 4 minutes. The following graphs are

all the proles in the monitor.

• Things You Should Know Before Exercising

The values calculated or measured by the computer are for exercise purpose

only, not for medical purpose.

Programs Selection:

There are 23 programs 1 Manual Program, 10 Preset Programs, 4 Heart

Rate Control Programs, 5 User Setting Programs, 1 Speed Independent

Watt-Program, 1 Pulse Recovery Measuring and 1 Body Fat program.

Computer Instructions

The monitor is designed for programmable magnetic bikes and introduced

with the following categories:

- Key Functions

- About Displays

- Operating Ranges

- Things You Should Know Before Exercising

- Operation Instructions

• Key Functions

There are total 5 keys including START/STOP, FUNCTION(F), UP(+),

DOWN(-), and RECOVERY (TEST).

START/STOP: Starts or stops the program chosen. And, resets the monitor

by pressing and holding for 2 seconds.

FUNCTION (F): Chooses or enters the functions from PROGRAMS, TIME,

DISTANCE, WATT, CAL, TARGET HEART RATE, AGE, and 10 columns.

The chosen function shall ash. Please note that not all the functions can be

selected in every program according to the types of each program. During

exercise, press the F-key to display the functions RPM and calories or speed

and distance permanently or alternately.

UP(+): Selects or increases the values of PROGRAMS, TIME, DISTANCE,

WATT, CAL., TARGET HEART RATE, AGE, and 10 columns.

DOWN(-): Selects or decreases the values of PROGRAMS, TIME,

DISTANCE, WATT, CAL., TARGET HEART RATE, AGE, and 10 columns.

RECOVERY(TEST): Starts the function of PULSE RECOVERY.

• About Display

PROGRAM:

Indicates the programs selected from PROGRAM 1 to PROGRAM 21

LEVEL:

Indicates the level of loading selected from LEVEL 1 to LEVEL 24.

Manual Program Programm 1 Rolling Program 2 Valley

Programm 3 Fatburn Programm 4 Ramp Programm 5 Mountain

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit ET 2000 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info