Bedienungsanleitung Christopeit Runner Pro Magnetic - 98292 (Seite 18 von 44) (Deutsch, Englisch, Holländisch, Französisch)

517234

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Computer instructions for 98292

The enclosed training computer provides high convenience in training.

All values relevant to the training are displayed in a corresponding

window.

From the beginning of the training session onwards, the required time,

the current speed, the approximate energy consumption, the travelled

distance and the current pulse rate are displayed. All values are recorded

incrementally for zero upwards. If the training session is to last for a

particular period, a particular number of calories is to be consumed, a

particular distance travelled and a particular pulse rate not exceeded,

these values can be entered individually or as combinations.

The computer is switched on by brieﬂ y pressing one of the buttons or

simply by beginning a training session. Select the desired function for

input by pressing the „F“ button. The function which can be changed is

displayed.

Each desired value can be entered by pressing the two arrow buttons.

The „E“ button stand for an increasing value starting from zero

and also for a decreasing value starting from the maximum value.

To start the computer, simply begin your training session. The computer

then begins to measure and display all values.

To stop the computer, simply end the training session. The computer

stops all measurements and holds the last achieved values. The last

reached values in the functions TIME, CALORIES, ODO and KM are

stored and training can proceed with these values when the training

session is resumed.

The computer switches off automatically approx. 4 minutes after the

training session has ended. All values reached by then are erased.

Displays:

1. „TIME“ - display:

Usually, the currently required time is displayed in minutes and seconds.

A particular value can be speciﬁ ed using the „E“ button. If a particular

time has been speciﬁ ed, the remaining time is displayed. When

the speciﬁ ed time has elapsed, this is indicated by an acoustic signal.

In this function, the last reached time is stored until the computer

switches off. (Maximum limit of the display is 99.59 minutes.)

2. „SPEED“ - display:

The current speed is displayed n kilometres per hour. A particular value

cannot be speciﬁ ed with the „E“ button. The last achieved value is not

stored in this function.

(Upper limit of the display is 99.9 km/h)

3. „CAL“ display:

The current amount of consumed calories is displayed. A particular

value can be speciﬁ ed with the „E“ button. If a particular consumed

amount is speciﬁ ed, the amount of calories remaining to be

consumed is displayed. When the speciﬁ ed value is reached, this is

indicated by an acoustic signal.

In this function, the last reached time is stored until the computer

switches off. (Upper limit of the display is 9:999 calories)

4. „DISTANCE“ display:

The current value of the travelled kilometres is displayed. A particular

value can be speciﬁ ed with the „E“ button. If a particular distance

is speciﬁ ed, the distance remaining to be travelled is displayed. When

the speciﬁ ed value is reached, this is indicated by an acoustic signal.

In this function, the last reached time is stored until the computer

switches off. (Upper limit of the display is 99,99 km)

5. „PULSE“ display:

The current pulse rate is displayed in beats per minute (bpm).

A particular value can not be speciﬁ ed with the „E“ button.

(Upper limit of the display is 90- 220 pulse beats per minute)

6. „ODO“ TOTALDISTANCE - display:

The current status of the travelled kilometres of all previous training

sessions including current training session is displayed. A particular value

cannot be speciﬁ ed. The values last attained by this function are stored.

(Limit of the display: 9.999 km.)

7. „SCAN“ function :

If this function is selected, the current values of all functions are displayed

successively in a constant sequence approx. every 5 seconds.

Buttons:

1. „E“ enter-key:

The speciﬁ ed values of the individual functions can be entered in steps

by each pressing of these buttons. The desired function must ﬁ rstly be

selected using the „F“ button.

After training has begun, the display counts down from the speciﬁ ed

value to zero.

2. „F“ function-key:

Pressing this key once brieﬂ y makes it possible to change from one

function to another, i.e. the respective functions can be selected for which

entries can be made using the „E“ key. The currently selected function is

indicated by an icon in the respective window.

Holding the key pressed (approx. 2 seconds) allows all last attained

values to be deleted. All values of all displays are then set to zero except

the Totaldistance „ODO“.

3. „L“ = Delete -key:

When this key is pressed brieﬂ y, the values chosen with the „E“ key are

reset to zero.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit Runner Pro Magnetic - 98292 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info