Bedienungsanleitung Christopeit TM2 12412 (Seite 21 von 52) (Deutsch, Englisch, Holländisch, Französisch)

585797

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

English

USER MANUAL OF COMPUTER

Function of Displays:

Pulse-Display:

Shows actually heart rate data.

Speed-Display:

Shows actually speed in km/h.

Distance-Display:

Shows actually distance in KM.

Time-Display:

Shows actually time of exercising in minutes and seconds.

Calories-Display:

Shows actually calories in kcal.

Function of keys:

F-key:

PROGRAM key: On the stop status, press F-key to select exer-

cising speed programs -P1->P2->P3->P4->P5-

E/L-key:

Select key of time-program, distance program or calories pro-

gram. Pressing this key after program stop deletes all settings.

Start/Stop: Press Start/Stop-key to start exercise program (motor

starts running) and press Start/Stop-key during exercising stops

program (running motor will slow stop).

“+”-key:

Press speed up key increase settings or motor speed.

“-”-key:

Press speed down key decrease settings or motor speed.

Quick Speed- keys 3, 6, 9, 12:

Press one of these keys and the speed changes direct into 3km/h,

6km/h, 9km/h and 12km/h

MANUAL MODE:

How to start manual mode:

Put in the AC plug in wall power 230V~50Hz and put on the power

switch (17).

Put safety clip (59) onto the computer and it will show normal ma-

nual mode.

Stand your feet on both side rails.

Put the safety key at you exercise cloth and press start/stop-key

to start with exercising. After a 5 sec. count down, the motor begin

to run slowly and you can step on the running belt and follow the

speed. Adjust the speed with “+” and “-“ -keys into desired speed.

If put off the safety clip from computer at any time, the motor stop

slowly and the display will show E0. After put on the safety key on

computer the normal manually program will show.

Press “+” or “-“ -key to adjust value of speed.

Press quick speed -key to adjust speed quickly.

All values of the displays will counter up.

Setting Programs Time-Distance-Calories:

Time Program:

On the normal manual mode, press E/L-key, to enter time program

The time display will ﬂash and the initial value is 20:00. Press “+”-

key or “-“-key to set value. The range is: 8:00-99:00. If set a value

the display counts up till zero and then stops running motor.

Distance-Program:

On the normal manual mode, press E/L-key, to enter distance pro-

gram The distance display will ﬂash and the initial value is 5,00KM.

Press “+”-key or “-“-key to set value. The range is: 1,00-99:00KM.

If set a value the display counts up till zero and then stops running

motor.

Calories-Program:

On the normal manual mode, press E/L-key, to enter calories pro-

gram. The calories display will ﬂash and the initial value is 500kcal.

Press “+”-key or “-“-key to set value. The range is: 10-990kcal. If

set a value the display counts up till zero and then stops running

motor.

RANGE OF ALL FUNCTIONS:

INITAL INITIAL SETTING DISPLAY

VALUE RANGE RANGE

TIME(MIN:SEC) 0:00 20:00 8:00-99:00 0:00-99:59

SPEED(KM/H) 0.0 N/A N/A 1.0-16.0

DISTANCE(KM) 0.00 5.00 1.00-99.00 0.00-99.99

PULSE(BPM) P N/A N/A 40-199

CALORIES(KCAL) 0 500 10-990 0-999

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit TM2 12412 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info