Bedienungsanleitung Christopeit TM 2000S - 1574 (Seite 26 von 36) (Deutsch, Englisch)

656855

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

USER MANUAL OF COMPUTER

Function of Displays:

Pulse-Display:

Shows actually heart rate data.

Speed-Display:

Shows actually speed in km/h (0-20 km/h).

Distance-Display:

Shows actually distance in KM.

Time-Display:

Shows actually time of exercising in minutes and seconds.

Calories-Display:

Shows actually calories in kcal.

Program-No. Display:

Shows actually exercise programs P1~b1.

Program-proﬁle Display:

Shows the exercise proﬁle of exercise programs P1~b1.

Incline % Display:

Shows actually inclination of 0-18%.

Function of keys:

F-key:

PROGRAM key: On the stop status, press F-key to select exer-

cising speed programs -P1-b1.

E-key:

Select key of time-program, distance program or calories pro-

gram.

L-key:

Pressing this key deletes settings.

Start/Stop: Press Start/Stop-key to start exercise program (motor

starts running) and press Start/Stop-key during exercising stops

program (running motor will slow stop).

“+”-key:

Press speed up key increase settings or motor speed. This key

function is also on the pulse grips.

“-”-key:

Press speed down key decrease settings or motor speed. This key

function is also on the pulse grips.

“+”- incline key:

Press incline up key increase inclination. This key function is also

on the pulse grips.

“-”- incline key:

Press speed down key decrease inclination. This key function is

also on the pulse grips.

Quick Speed- keys:

Press one of these keys and the speed changes direct into 3, 5, 7,

9, 11, 13 + 16 km/h

Incline - keys:

Press one of these keys and the inclination changes direct into 2,

4, 6, 9, 12, 15 + 18%.

MANUAL MODE:

How to start manual mode:

Put in the AC plug in wall power 230V~50Hz and put on the power

switch (47).

Put safety clip (59) onto the computer and it will show normal ma-

nual mode.

Stand your feet on both side rails.

Put the safety key at you exercise cloth and press start/stop-key

to start with exercising. After a 3 sec. count down, the motor begin

to run slowly and you can step on the running belt and follow the

speed. Adjust the speed with “+” and “-“ -keys into desired speed.

If put off the safety clip from computer at any time, the motor stop

slowly and the display will show E0. After put on the safety key on

computer the normal manually program will show.

Press “+” or “-“ -key to adjust value of speed.

Press quick speed -key to adjust speed quickly.

All values of the displays will counter up.

Setting Programs Time-Distance-Calories:

Time Program:

On the normal manual mode, press E-key, to enter time program

The time display will ﬂash and the initial value is 0:00. Press “+”-

km/h key or “-“-key to set value. The range is: 0:00-99:00. If set a

value the display counts up till zero and then stops running motor.

Distance-Program:

On the normal manual mode, press E-key, to enter distance pro-

gram The distance display will ﬂash and the initial value is 1,00KM.

Press “+”- km/h key or “-“-key to set value. The range is: 1,00-

99:00KM. If set a value the display counts up till zero and then

stops running motor.

Calories-Program:

On the normal manual mode, press E-key, to enter calories pro-

gram. The calories display will ﬂash and the initial value is 500kcal.

Press “+”-km/h key or “-“-key to set value. The range is: 10-

990kcal. If set a value the display counts up till zero and then stops

running motor.

RANGE OF ALL FUNCTIONS:

Exercise programs P1-b1:

On the normal manual mode, press F-key to chose one of the

exercise speed programs P1-b1. Each program is divided into 30

intervals of time and the speed changes as following program list

shows. Set a time for training session and press Start/Stop to start

the program. Pressing Start/Stop again to have a break or ﬁnish

earlier the program. Press speed “+” or “-“-key to adjust speed

during the program if it is to quick or slow. With next intervals of

time the speed level will change back to program mode.

If the program runs till end of time the motor will stop running after

the display counts down time to zero.

INITAL INITIAL SETTING DISPLAY

VALUE RANGE RANGE

TIME(MIN:SEC) 0:00 0:00 0:00-99:00 0:00-99:59

SPEED(KM/H) 0.0 N/A N/A 1.0-16.0

DISTANCE(KM) 0.00 1.00 1.00-99.00 0.00-99.99

PULSE(BPM) P N/A N/A 40-199

CALORIES(KCAL) 0 500 10-990 0-999

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit TM 2000S - 1574 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info