Bedienungsanleitung Christopeit TM 650S (Seite 19 von 56) (Deutsch, Englisch, Holländisch, Französisch)

793209

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English

Problem Potenal reasons Soluons

---- The safety lock is removed 1. Put the safety clip in posion

2. Change the safety clip or safety clip socket at computer.

3. If it’s sll not ok, than change the computer.

E01 Communicaon abnormality: abnormal

communicaon between the controller and

the electronic meter aer powering on.

1. Switch o the treadmill and plug out AC cable.

2. Check each secon of communicaon cables from the electronic meter to the controller and ensure

that all cables are well connected.

3. Check whether cables between the electronic meter and the controller are damaged; if yes, replace the

damaged wire.

E02 Voltage-proof protecon: 1. Switch o the treadmill and plug out AC cable

2. Check whether the power supply voltage is less than 50% of the normal value. Please ensurecorrect

voltage and test again.

3. Check whether the controller emits the odor of burning; if yes, replace the controller.

4. Check whether motor cables are well connected; re-connect motor wires.

E03 No sensor signal: 1. Switch o the treadmill and plug out AC cable.

2. Check whether the sensor cable is well plugged or whether it is damaged; plug it well or replace the

sensor.

E05 Over-current protecon: 1. Check whether power supply voltage specicaons is inconsistent or too low and use correct voltage

specicaons for re-test.

2. System self-protecon is triggered under excessive current caused by the excessive load more than

the rated value, or some place of the treadmill is jammed so that the motor cannot rotate; thus, the

system start up self-protecon against excessive current under excessive load; adjust the treadmill and

restart it.

3. Check whether there is over-current sound or burning odor when the motor is running; replace the

motor.

4. Check whether the controller emits abnormal odor; replace it if yes.

E07/E08 EEPROM defect Replace the control board.

Motor

will not

start

The motor cable is damaged or connected

incorrectly.

The fuse on the control board has been

damaged or dropped.

The control board is defect.

The motor is defect.

Check the motor cable.

Check the fuse. Reinsert it, or replace the fuse.

Replace the control board.

Replace the motor.

Meanings of error message codes

In case of malfuncons may adjoining list of error messages help for savvy

people to get funcon back. Basically, electrical repairs only in compliance

with the relevant safety rules which exists. For more informaon and

assistance in case of malfuncons with our service department (contact

details see last page.)

INDOOR TRAININGS APP

The product can be used with the Kinomap app. This enables enter-

taining and interacve training with Android or IOS devices and saving

training data.

Sport, coaching, gaming and eSport are the keywords of the Kinomap

app. This contains many kilometers of real lm material to exercise inside

as if you were outside; Tracking routes and analysis of your performance;

Coaching content; Mulplayer mode; new posts daily; Ocial indoor ra-

ces and more ... The APP thus contains approx. 100,000 videos recorded

by athletes and 200,000 km of accumulated tracks for cycling, running or

rowing for currently approx. 270,000 members from all over the world.

Download the app and connect

Scan the adjacent QR code with your smartphone / tablet or use the se-

arch funcon at the Playstore (Android) or APP Store (IOS) to download

the Kinomap APP. Register and follow the instrucons in the APP.

Acvate Bluetooth on the smartphone or tablet and select the device

manager via the menu in the APP and then select the „treadmill“ catego-

ry. Then select your type designaon via the manufacturer logo „Chris-

topeit Sport“ in order to connect the sports equipment. Depending on

the sports equipment, dierent funcons are recorded by the APP via

Bluetooth or data is exchanged.

Aenon: The Kinomap APP oers a free trial version for 14 days. Aer

that, fees will apply which are listed on the Kinomap homepage. Further

informaon can be found at: hps://www.kinomap.com/en/

IOS AND ANDROID APP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit TM 650S Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info