Bedienungsanleitung Christopeit XL 2000 (Seite 15 von 48) (Deutsch, Englisch, Holländisch, Französisch)

793212

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English

Computer instructions for 1910

The supplied computer allows the most convenient training. Every value

relevant to training is displayed in a corresponding window.

From the beginning of the training session, the required time, the current

speed, the approximate calorie consumption and the travelled distance are

displayed. All values are counted from zero upwards.

If you wish to see one value displayed constantly select this with the „F“ key.

If you wish to see these values in constant alternation, select the „SCAN“

function. The display then changes from one function to the next at intervals

of approx. 6 seconds.

The computer is switched on by briey pressing the F- key or simply by

beginning training. The computer begins to register and display all values.

To stop the computer, just stop training. The computer stops all measurements

and retains the last attained values. The last attained values in the functions

TIME, CALORIES and KM are stored for 4 Min. and training can continue

with these values when training is resumed.

The computer switches of automatically approx. 4 minutes after training is

stopped.

Displays:

1. „SPEED“ display:

The current speed is displayed in kilometres per hour. The values last attained

by this function are not stored. (Limit of the display: 99.9 km/h.)

2. „TIME“ display:

The currently required time is displayed in minutes and seconds. The values

last attained by this function are stored. (Limit of the display: 99.59 minutes.)

3. „DISTANCE“ display:

The current status of the travelled distance is displayed. The values last

attained by this function are stored. (Limit of the display: 999,9 km.)

4. „CALORIES“ display:

The current status of the consumed calories is displayed. The values last

attained by this function are stored. (Limit of the display: 9999 calories.)

5. „PULSE“ display: Only with optionaly Pulsebelt available (un-codet

5,0-5,5 kHz

The current pulse rate is displayed in beats per minute. The values last

attained by this function are not stored. (Limit of both displays: 40 – 240

pulse beats per minute.)

6. „RPM“ display:

The current RPM is displayed in revolutions per minute. The values last

attained by this function are not stored. (Limit of the display: 999 RPM.)

7. „SCAN“ function:

If this function is selected, the current values of all functions are displayed

successively in a constant sequence approx. every 5 seconds.

Keys:

1. „F“ key:

Pressing this key once briey makes it possible to change from one function to

another, i.e. the respective functions can be selected. The currently selected

function is indicated by an icon in the respective window. If the key is held

longer (approx. 3 seconds), all last attained values are deleted.

2. „E“ key (Enter):

By pressing this key once, it is possible to specify values step by step in the

respective functions. For this, the desired function must rstly be selected

using the „F“ key.

Holding the key pressed activates faster running. When training begins, the

specied values are then counted down to zero.

Replacing the battery:

1. Open the battery compartment cover and then remove the used Battery.

(If the battery should leak remove them under increased considering that

the battery acid is not into contact with skin come and clean the battery

compartment thoroughly.)

2. Insert the new batteries (2x type: micro 1.5V - AAA) in the correct order

and taking into account the polarity in the battery compartment and close

the battery cover so that it clicks into place.

3. If the computer does not pick up immediately, the function should Batteries

are removed for 10 seconds and re-inserted.

4. The empty battery properly in accordance with the disposal regulations

disposed of and do not give residual waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit XL 2000 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info