Bedienungsanleitung Ciclo CM 628i Master (Seite 14 von 16) (Englisch)

588918

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

the correct aim to follow in their training. But how do you

train to achieve those aims in the most efficient possible

manner? How do you find the right intensity of effort during

the training?

CICLO

IInnZone® is the optimum training

ZONE for effort, resistance and weight loss.

What does

CICLO

IInnZone® do?

It calculates the optimum training zone for effort, resis-

tance and weight loss.

The values vary from person to person and they offer a

valid training support - always staying between 70% and

85% of the maximum heart rate.

(+/- 5% of tolerance, taking into consideration the actual

heart rate when at rest and the level of training).

The question of burning fat is seen in the “correct” light

with

CICLO

IInnZone® – on the basis of the personal

data collected.

8. BATTERY CHANGE

If the values and adjustments of the CM 628i are to be

maintained during the battery change, the unit must be

switched into the power-saving mode before carrying out a

battery change (see Chap. 6). In addition, the new battery

must be inserted within 20 sec. after removal of the old

battery, otherwise the data will be deleted (in spite of

power-saving mode).

CICLOMASTER CM 628i:

Unscrew anti-clockwise the screwed cap on the reverse

side of the computer with the aid of a coin. Remove the old

battery and insert new 3-volt lithium battery Type CR 2032

with the positive terminal Up. Close screw cap again.

Do not overtwist battery cover!

Speed and cadence transmitter:

The battery in the transmitters has a life of approx. 5 years

with normal use. For battery change, please send in the

transmitter (for address, see Chap. 11).

Transmitter belt battery:

Unscrew the battery cover in an anti-clockwise direction

and remove the old battery. Fit a new CR2032 lithium

battery, with the plus sign (+) facing upwards, and replace

the cover.

Please do not dispose of used batteries in domestic

waste, but dispose of according to regulations.

6160

9. CARE AND MAINTENANCE

Do not expose the device to direct sunlight, or to low or

high temperatures (below 0°C or above 50°C).

Keep the heart rate transmission belt clean:

Do not wash the transmitter belt in a washing machine, due

to the electrodes which are attached. To clean the trans-

mitter belt, wipe it carefully with a detergent for synthetic

fabrics. Do not dry in direct sunlight. The elastic chest belt is

washable, but it must be carefully dried before use.

10. TROUBLE SHOOTING

Faulty display or no indication in the display

No reaction from the pushbuttons

• Press AC button on the underside of the device once or

repeatedly

Caution: Pressing the AC button for 3 sec. deletes all

values and adjustments

• Check and/or renew battery

Instantaneous speed is not displayed

Speed too high or too low

• Check transmitter and magnet for correct installation

• Check whether magnet is correctly mounted on the

spoke (directly opposite the marker of the transmitter

with max. 3 mm separation distance)

•Transmitter battery empty or transmitter defective

• Check distance between handlebar bracket and

transmitter (max. 2 m)

• Check adjusted wheel circumference

• Check unit of measure

Cadence is not displayed

• Check whether switched on in the adjusting mode

• Check transmitter and magnet for correct installation

•Transmitter battery empty or transmitter defective

No heart rate displayed or values displayed are

incorrect or unstable

• proof whether heart rate is switched on in the setting

mode

• Check transmitter belt (battery)

• Skin too dry or cold

• Distance between CM 628 and transmitter belt is too

great (max. 10 m)

Manual changeover to 2nd bike does not function

• Check whether the speed is at zero (only then is a

changeover possible)

02 CM 628i engl 34-65 27.09.2005 8:40 Uhr Seite 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo CM 628i Master Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo CM 628i Master

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info