Bedienungsanleitung Ciclo HAC 5 (Seite 8 von 38) (Englisch)

588931

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

4. Usage

4.1 Profiles

The

HAC5 offers the possibility to set five different profiles, these are termed in the following as

Bike 1, Bike 2, RDS, Alpine

and Run.

Every profile allows separate settings each, the different functions can be chosen separately for each

profile (and therefore what is displayed).

So if you feel no need for example to display the altitude measurements while running (and thus all

connected functions like slope, performance etc), you can turn off this function under the profile

Run. If the profile Run is activated afterwards, these displays are not shown when going through the

functions.

This means that the number of the possible displayed functions can be determined individually for

each profile and displays not needed can be turned off.

In addition to these profiles there are two sub-profiles, HR-Intv (heart rate-interval) and CAD-Intv.

These can be turned on in addition, meaning that if you choose Bike 1, for example, you can pick the

CAD interval for this setting.

Alpine is the default setting. To switch or pick a profile simply press the two right buttons (UR- and

LR-button) simultaneously.

The profile menu now appears on the display (by pressing the UR- or LR-button all menu points can

be accessed one by one).

Choose the desired profile with the UR-/LR-button and confirm

by shortly pressing the MR-button.

If HR-Intv (heart rate-interval) or CAD-Intv (cadence-interval) is selected, the interval is valid for the

previously chosen profile (example: HAC5 is in profile bike 1. If CAD-intv is selected, then the ca-

dence-interval is active for bike 1).

To check which profile is active at the moment and/or begin transmitter search (which searches for

all transmitters active in the mode concerned), press LL for three seconds.

The display shows the active profile for 10 seconds. During this time, the automatic transmitter

search runs in the background.

4.2 Baro Mode/Alti Mode

The HAC5 is able to switch automatically between measuring the altitude and the barometer. This can

also be switched manually: to do so shortly press UR- and LR-buttons simultaneously in the profile

selection menu, then choose the desired mode with the UR-/LR-button.

Then confirm by shortly pressing the MR-button.

If the altitude doesn’t change for more than 350 metres per hour in the alti mode – for example during

a pause – then the HAC5 automatically switches to the baro mode. The mountain symbol disappears

and the weather symbol appears instead on the display.

The current altitude is saved. Through this altitude automatism, the altitude does not have to be re-

adjusted if air pressure changes occur (during the night or a break for example). If you move up and

down at short intervals again, the HAC5 switches back to the alti mode.

If the baro mode (barometre-mode) is selected, or the alti mode (altitude mode) selected or automati-

cally activated, then the HAC5 switches to that mode in the current setting, this may cause some

functions to not be shown although they are allowed in the profile.

(The baro mode, for instance, does not allow a display of altitude and therefore no display of data ba-

sed on altitude).

4.3 Transmitter search – digital system

In order for the HAC5 to display speed or heart rate or similar, the according transmitter has to be

found first.

The search begins automatically when a recording is started (UL- and LL-buttons pressed simultane-

ously for three seconds), and manually by pressing the LL-button for three seconds (in both cases, the

active profile is shown for 10 seconds).

During this display all transmitters are searched for which are active in this profile. Should no or not all

transmitters be found during this time, then this is displayed when selected, for example: SPD: no TX,

meaning that for the speed (= spd) display there were no transmitters (= tx) found.

Bike1

Bike2

RDS

Alpine

Run

HR-Intv

CAD-Intv

Baro Mode

Alti Mode

Exit

Profile

Alpine

No Interval

Profiles

Baro Mode/Alti Mode

Transmitter search

– digital system

Sunny

cloudy

unsettled (shower)

rainy

SPD: no TX

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 5 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info