Bedienungsanleitung Ciclo HAC 5 (Seite 26 von 38) (Englisch)

588931

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Daily/total altitude meters descent

Sub-function of the current altitude function.

In the upper display it indicates the sum of the descent altitude covered during this tour so far and in the

lower display the sum of all descent altitudes covered since the beginning of the first tour.

Range: 0 – 300000 m or 999999 ft

Note: For technical reasons the altitudes are only summated when there is a minimum of 2 ascent or

descent altitudes which are exceeded continuously.

Maximum altitude

Sub-function of the current altitude function.

Indicates the highest reached (or set) altitude during the present tour in the upper display and the sum

of all highest reached (or set) altitudes since the beginning of the first tour in the lower display.

Range: -100m –9000m or –330 – 29000 ft

Time

Indicates the current time.

Range: 00:00 – 23:59 or 00:00 – 12:59 (AM/PM, colon flashes at AM time)

Date

Sub-function of the time function.

Indicates the current year in the upper display, the weekday in the medium display and the date in the

lower display (leap years are considered) in the format TT/MM (12-hour display in the format MM/TT).

Time zone 2

Sub-function of the time function.

Indicates the time of the time zone 2.

Stopwatch

The stopwatch can be started, stopped and paused by pressing the UM-button shortly.

Start / Stop

The stopwatch is reset to zero by pressing the UM-button for 3 seconds (all split and lap times are

deleted, too).

Range: 0 – 999:59 (the indication M:SS:1/100 appears up to 10 minutes while the second colon is

flashing, up to 10 hours: S:MM:SS, more than 10 hours: SSS:MM)

Split time/lap time

Press UL-button shortly.

Sub-function of the running stopwatch:

Stops the current split time and lap time. For 3 seconds the lap time is indicated in the upper display

and the split time is indicated in the lower display. Up to 100 split and lap times can be stopped and

saved.

The split time is the time since the start of the stopwatch, the lap time is the time since the last stop of

the split time or since the last lap time.

Range: 0 – 999:59 (the indication M:SS:1/100 appears up to 10 minutes while the second colon is

flashing, up to 10 hours: S:MM:SS, more than 10 hours: SSS:MM)

Sub-function of stopped stopwatch:

Press UL-button shortly.

Indicates the saved split and lap times with the corresponding counter and the average heart rate of the

lap (and how much of the personal maximum heart rate this is in percentage).

Therefore the split/lap time is indicated firstly, after 3 seconds the indication switches automatically and

displays the average heart rate of the lap and how much of the personal maximum heart rate this is in

percentage for 3 seconds.

Pushing the UL-button shortly again indicates the next split/lap time.

Up to 100 lap times can be saved and indicated.

Range: 0 – 999:59 (the indication M:SS:1/100 appears up to 10 minutes while the second colon is

flashing, up to 10 hours: S:MM:SS, more than 10 hours: SSS:MM)

Countdown

The countdown (or the heart rate or cadence time manager, if switched on) can be started by pressing

the UM-button shortly.

Start of the countdown

After the start, the HAC5 counts the indicated time of the countdown backwards until zero is reached

and an alarm signal can be heart. Then the countdown stays at zero.

When using the heart rate interval or the cadence interval (with or without the time manager), the count-

down 2 is automatically counted backwards after the alarm signal. When this is set on zero, another

alarm signal can be heart and the countdown 3 starts. At the end of this countdown the countdown

Tour _

237

Altitude

3048

Total _

Daily/total altitude

meters descent

Tour

2116

Max.Altitude

3942

Total

Maximum altitude

Year

2006

Thursday

01-06

Day Month

Date

Time zone 2

Stopwatch

Split time/lap time

Countdown

Time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 5 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info