Bedienungsanleitung Cisco 7941 (Seite 8 von 17) (Englisch)

67327

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

• Enter the desired 2-digit speed dial code

Speed Dial (for 7961 model only)

You can assign up a phone number to a

Speed Dial soft key.

• Dial 74*

• At the prompt, press a Speed Dial

softkey

• Enter the phone number you want to

assign to this soft key and press #

• After the prompt, press # and hang up

Dialing a Speed Dial Number

• Get dial tone.

• Press the Speed Dial soft key.

Call Block (Selective)

Selective Call Rejection lets you program your

phone to reject calls from a list of telephone

numbers.

To configure your Call Block List

• Dial *60

• Follow the voice prompts to enable or

disable the feature, or add the last caller

to the blocked list, or list blocked

numbers.

Call Forward (All Calls)

Call Forward (All Calls) lets you forward all

incoming calls to another number.

To Enable Call Forwarding

• Press the Forward softkey.

• Enter the phone number for the

forwarding destination. On external

phone numbers, include the Outside

Access Digit.

• Press the Forward softkey again. The

number should appear on the LCD.

To Disable Call Forwarding

• Press the Forward two times.

Call Forward (Busy)

Call Forward (Busy) forwards calls to another

number when you are already on a call.

To Enable Call Forward (Busy)

• Dial 76*

• Enter the phone number for the

forwarding destination followed by #

• Press # to confirm

• Press 2 to exit, then hang up

To Cancel Call Forward (Busy)

• Dial 77* and then hang up

Call Forward (No Answer)

Call Forward (No Answer) lets you forward

calls when you don’t answer.

To Enable Call Forward (No Answer)

• Dial 78*

• Enter the extension or number for the

forwarding destination followed by #

• Press # to confirm

• Press 2 to exit, then hang up

To Cancel Call Forward (No Answer)

• Dial 79* and then hang up

Call Forward (Out of Service)

Call Forward (Out of Service) automatically

forwards calls to another location when your

phone goes out of service. The forwarding

destination is configured through the Web

Portal or by FeatureTel.

To Enable Call Forward (OOS)

• Dial 70*

• Press # to confirm

• Press 2 to exit, then hang up

To Disable Call Forward (OOS)

• Dial 71* and then hang up

Call Forward (Selective)

Call Forward (Selective) forwards calls from

certain numbers to another number.

To Configure the Selective Call List

• Dial *63

• Follow the voice prompts to enable or

disable the feature, or add, delete, or list

numbers to be forwarded.

NOTE: Disabling Call Forward (Selective) will

not delete the Selective Call List. When

entering an external telephone number to the

list, enter the 10-digit number. Do not include

the Outside Access Digit.

Call Jump

Call Jump forwards a call already in progress

to another number.

• Dial **# + phone number + # to send the

call to that phone number.

• Dial **8 (**V) to send the call to voice

mail

• Dial **0 to cancel an initial * or **

NOTE: This feature requires FeatureTel Web

Portal service. You cannot jump to or from an

emergency services number.

FeatureTel Cisco 7941/7961 IP Phone User Guide Page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cisco 7941 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info