497614
48
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
Switch In-Progress Call from Mobile Phone to Desk Phone Sharing Same Line
(Session Handoff)
Procedure
Step 1
While on your mobile phone, enter the access code for the Session Handoff feature (for example, *74). Contact
your system administrator for a list of access codes.
Step 2
Hang up the call on your mobile phone to disconnect the mobile phone but not the call.
Step 3
Press Answer on your desk phone within 10 seconds and start talking on the desk phone. Your system
administrator sets the maximum number of seconds you have to answer the call on your desk phone.
The other Cisco Unified devices that share the same line display a Remote in Use message.
Call Transfer
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Tips
If on-hook transfer is enabled on your phone, you can either hang up to complete the call, or press
Transfer and then hang up.
If on-hook transfer is not enabled on your phone, hanging up without pressing Transfer again places
the call on hold.
You cannot use Transfer to redirect a call on hold. Press Resume to remove the call from hold before
transferring it.
When a call is chaperoned, the call chaperone cannot use transfer.
To redirect a call to a voice message system, press iDivert. For more information, see Call Transfer To
Voice Message System, on page 33.
Transfer Call Without Talking to Transfer Recipient
Procedure
Step 1
From an active call, press Transfer.
Step 2
Enter the target number.
Step 3
Press Transfer again to complete the transfer or EndCall to cancel.
Step 4
If your phone has on-hook transfer enabled, complete the transfer by hanging up.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
32
Calling Features
Switch In-Progress Call from Mobile Phone to Desk Phone Sharing Same Line (Session Handoff)
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco 7941G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cisco 7941G

Cisco 7941G Bedienungsanleitung - Deutsch - 120 seiten

Cisco 7941G Bedienungsanleitung - Holländisch - 72 seiten

Cisco 7941G Bedienungsanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info