497614
73
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
Then...If you want to...
Use the various features of your mobile phone (for example, *74). Contact
your system administrator for a list of access codes.
Transfer your incoming
mobile active call to a
desk phone
Mobile Connect and Mobile Voice Access
With Mobile Connect and Mobile Voice Access installed, you can use your mobile phone to handle calls
associated with your desktop phone number.
When you enable Mobile Connect, your desktop and remote destinations receive calls simultaneously.
When you answer the call on your desktop phone, the remote destinations stop ringing, are disconnected, and
display a missed call message.
When you answer the call on one remote destination, the other remote destinations stop ringing, are
disconnected, and a missed call message is shown on the other remote destinations.
Then...If you want to...
Use the User Options web pages to set up remote destinations and create access
lists to allow or block calls from specific phone numbers from being passed to
the remote destinations. See Phone and Access List setup for Mobile Connect,
on page 96.
Configure Mobile Connect
See Call Answer, on page 25.Answer a call using your
mobile phone
See In-Progress Call Movement, on page 31.Switch an in-progress call
between your desk phone
and mobile phone
See Additional Call Options, on page 22.Make a call from your
mobile phone
Tips
When calling Mobile Voice Access, you must enter the number you are calling and your PIN if any of
the following are true:
The number you are calling from is not one of your remote destinations.
The number is blocked by you or your carrier (shown as Unknown Number).
The number is not accurately matched in the Cisco Unified Communications Manager database;
for example, if your number is 510-666-9999, but it is listed as 666-9999 in the database, or your
number is 408-999-6666, but it is entered as 1-408-999-6666 in the database.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
57
Calling Features
Business Calls Using Single Phone Number
73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco 7941G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cisco 7941G

Cisco 7941G Bedienungsanleitung - Deutsch - 120 seiten

Cisco 7941G Bedienungsanleitung - Holländisch - 72 seiten

Cisco 7941G Bedienungsanleitung - Holländisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info