605001
40
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
Chapter 2 Installation
Checking the PC Configuration
2-16
Cisco 831 Router and SOHO 91 Router Hardware Installation Guide
78-14784-02
Perform the following steps to connect the Cisco 831 router’s console port to an
async modem:
Step 1 Connect the RJ-45 end of the SOHO/800 Series Router Modem Cable to the Cisco
831 routers console port.
Step 2 Connect the DB-25 connector end of the SOHO/800 Series Router Modem Cable
to an available port on the async modem.
Step 3 Connect one end of the RJ-11 cable to a wall jack.
Step 4 Connect the other end of the RJ-11 cable to a telephone line.
Checking the PC Configuration
Each PC that is connected to the router must be configured to use TCP/IP and to
use DHCP automatically to obtain its IP address. Follow these steps to configure
each PC that is running Microsoft Windows NT or Microsoft Windows 95, 98, or
2000. If the PC is running a different version of Microsoft Windows, refer to the
documentation that came with the PC.
Step 1 Start the PC, and open the Control Panel.
Step 2 Click the Network icon to display the Network window.
Step 3 Verify that TCP/IP has been added and associated with the Ethernet adapter.
TCP/IP is shown as a cable icon in the Configuration window on Microsoft
Windows 95, 98 and 2000, and as a cable icon in the Protocol window on
Microsoft Windows NT. If the icon is not visible, click Add, and add Microsoft
TCP/IP.
Step 4 To verify that the PC is configured to obtain an IP address automatically, click
the TCP/IP cable icon, and select the IP address tab in the TCP/IP Properties
window. If it is unchecked, check Obtain an IP address from a DHCP server.
The IP address and Subnet mask fields should be grayed out.
Step 5 To accept all changes and exit this window, click OK. Then click OK in the
Network window.
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco 831 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cisco 831

Cisco 831 Installationsanweisung - Deutsch - 12 seiten

Cisco 831 Installationsanweisung - Englisch - 8 seiten

Cisco 831 Installationsanweisung - Holländisch - 12 seiten

Cisco 831 Installationsanweisung - Französisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info