650695
17
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
1
Cisco SPA100 Series Administration Guide 23
Quick Setup for Voice over IP Service
The Quick Setup page is displayed automatically when you first log on ATA. You can use this
page to quickly configure connectivity to your providers Voice over IP network for your
analog phones.
NOTE Connecting to your service provider’s network requires Internet connectivity. With the default
network settings, your ATA should have Internet connectivity when you connect a cable from
the WAN port of the ATA to a port on your router or broadband network device. For more
information, see Internet Settings, page 26.
STEP 1 For Line 1 and Line 2, specify the settings for the phone services to be used by a analog (FXS)
phones or fax machines that are connected to the PHONE1 and PHONE2 ports.
Proxy: Enter the domain name or URL of the service providers proxy server.
Display Name: Enter the name that you want to use to identify your account. This name
typically is used as your Caller ID name.
User ID: Enter the user ID that is required to log in to your Internet account.
Password: Enter the password that is required to log in to your Internet account.
Dial Plan in (Line section only): Keep the default settings (recommended) or edit the
dial plan to suit your site. For more information, see Configuring Dial Plans, page 138.
STEP 2 Click Submit to save your settings. The voice service will restart.
STEP 3 To verify your progress, perform the following tasks:
a. Click Voice in the menu bar, and then click Info in the navigation tree. Verify that the
Registration State is Registered for Line 1 and Line 2 Status.
If the line is not registered, you may need to refresh the browser several times because it can
take a few seconds for the registration to complete. Also verify that your Internet Settings,
including DNS server settings, are configured according to the information from your ISP.
For more information, see Internet Settings, page 26.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco Cisco SPA112 VoIP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info