650695
39
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
Configuring the Voice Settings
System
Cisco SPA100 Series Administration Guide 47
1
System
Use the Voice > System page to configure general voice system settings and to enable logging
by using a syslog server. (Logging also can be configured in the Administration > Logging
pages. For more information, see Logging, page 113.)
Requirements for Logging
You need a computer that is on the same subnetwork as the ATA, to capture the log
files. This computer needs to be running a syslog daemon. Enter the IP address and the
port of this computer in the Syslog Server and Debug Server fields. Default port is 514.
You can deploy a syslog server to receive syslog messages from the ATA, which acts as
a syslog client. The syslog client device uses the syslog protocol to send messages,
based on its configuration, to a syslog server. The syslog messages can be accessed by
reviewing the "syslog.514.log" file which is the default name resides in the same
directory as the slogsrv.exe syslog server application.
Partners can download the Syslog Server for SPA Devices by using the link below
(login required):
www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/ps10499/
syslog_server_for_spa_devices.zip
Enter the settings as described below. After making changes, click Submit to save your
settings, or click Cancel to redisplay the page with the saved settings.
System Configuration
Custom CA Info The successfully downloaded CA information, or “Not
Installed” if no custom CA certificate was installed.
Default setting: Not Installed
Field Description
Field Description
Restricted Access
Domains
Domain that Cisco IP phones responds to SIP messages only from
the identified servers. Applicable to Line 1.
IVR Admin Passwd Password for the administrator to manage the ATA by using the
built-in IVR through a connected phone.
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco Cisco SPA112 VoIP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info