650695
70
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
Configuring the Voice Settings
Regional
Cisco SPA100 Series Administration Guide 78
1
Feature Dial Services
Codes
These codes tell the ATA what to do when the user is listening to
the first or second dial tone.
One or more *codes can be configured into this parameter, such as
*72, or *72|*74|*67|*82, etc. The maximum length is 79
characters. This parameter applies when the user has a dial tone
(first or second dial tone) After receiving dial tone, a user enters
the *code and the target number according to current dial plan. For
example, after user dials *72, the ATA plays a special tone called a
Prompt tone while awaiting the user to enter a valid target number.
When a complete number is entered, the ATA sends a INVITE to
*72 target_number as in a normal call. This feature allows the
proxy to process features like call forward (*72) or Block Caller
ID (*67)
The *codes should not conflict with any of the other vertical
service codes internally processed by the ATA. You can remove a
corresponding *code that you do not want to the ATA to process.
You can add a parameter to indicate which tone plays after the
*code is entered, such as *72‘c‘|*67‘p‘. Below is a list of allowed
tone parameters (note the use of open quotes surrounding the
parameter, without spaces)
‘c‘ = <Cfwd Dial Tone>
‘d‘ = <Dial Tone>
‘m‘ = <MWI Dial Tone>
‘o‘ = <Outside Dial Tone>
‘p‘ = <Prompt Dial Tone>
‘s‘ = <Second Dial Tone>
‘x‘ = No tones are place, x is any digit not used above
If no tone parameter is specified, the ATA plays Prompt tone by
default. If the *code is not to be followed by a phone number, such
as *73 to cancel call forwarding, do not include this parameter.
Instead, add the *code in the dial plan and the ATA send INVITE
*73@..... as usual when user dials *73.
Default setting: blank
Field Description
70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco Cisco SPA112 VoIP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info