650695
99
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
Administration Settings
Management
Cisco SPA100Series Administration Guide 109
1
TR-069
Use the Administration > Management > TR-069 page to configure communication with an
Auto-Configuration Server (ACS) via TR-069 CPE WAN Management Protocol (CWMP).
TR-069 (Technical Report 069) provides a common platform to manage all voice devices and
other customer-premises equipment (CPE) in large-scale deployments. It provides the
communication between the CPE and the ACS.
Web Utility Access Select the protocol to use for access to the configuration utility
from a device on the WAN side of the ATA. Choose HTTP and/
or HTTPS. For secure Internet access, select HTTPS. The
default value is HTTP.
Include the specified protocol when you enter the address in
your web browser. For example, with the HTTPS protocol, a
WAN IP address of 203.0.113.50, and the default Remote
Management Port of 80, you would enter: https://
203.0.113.50:80
Remote Upgrade If you enabled Remote Management, choose whether or not to
allow firmware upgrades from a device on the WAN side of the
ATA. Click Enabled to enable this feature, or click Disabled to
disable it. The default value is Disabled.
You can change this setting only when your computer is
connected to the configuration utility from the LAN.
Allowed Remote IP
Address
You can use this feature to limit access to the configuration
utility based on the IP address of a device. Choose Any IP
Address to allow access from any external IP address. To specify
an external IP address or range of IP addresses, select the second
radio button and then enter the desired IP address or range. The
default setting is Any IP Address.
Remote Management
Port
Enter the port number to use for access to the configuration
utility from a device on the WAN side of the ATA. The default
port number is 80.
Include the specified port when you enter the address in your
web browser. For example, with the HTTPS protocol, a WAN IP
address of 203.0.113.50, and the default Remote Management
Port of 80, you would enter: https://203.0.113.50:80
Field Description
99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco Cisco SPA112 VoIP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info