Bedienungsanleitung Cisco ip 7912g (Seite 34 von 66) (Englisch)

298878

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

26 OL-8166-01

Tips

• When on-hook transfer is enabled, you can either hang up or press Trnsfer, then hang up.

• If on-hook transfer is not enabled on your phone, be aware that hanging up instead of pressing

Trnsfer cancels the transfer action and places the party to be transferred on hold.

• You cannot use Trnsfer to redirect a call on hold. Press Hold to remove the call from hold before

transferring it.

Making Conference Calls

Conference calling allows three or more parties to participate in a call simultaneously. Your

Cisco Unified IP Phone can support several types of conference calls depending on your needs and

your phone’s configuration. The following conference softkeys may be available on your phone:

• Confrn—Use this softkey to establish conferences (3-16 participants) by calling each participant

individually. Standard conference calling is a default feature.

• Join—Use this softkey to establish a conference (3-16 participants) among several current calls on

a single line. Standard conference calling is a default feature available on most phones.

• cBarge—Use this softkey to begin a conference call (3-16 participants) on a shared line. This is an

optional feature available only for shared lines, and your system administrator must configure it

for you.

• MeetMe—Use this softkey to host a conference (up to 100 participants, depending on your

configuration) Meet-Me conferences require participants to call an established number at a

specific time. This is an optional feature that your system administrator must configure for you.

See “Starting or Joining a Meet-Me Conference Call” section on page 28 for more details.

Talk to the transfer

recipient before transferring

a call (consult transfer)

Press Trnsfer and enter the target number. Wait for the transfer

recipient to answer. If the recipient accepts the transferred call, press

Trnsfer again. If the recipient refuses the call, press EndCall and then

the Hold button to return to the original call.

If your system administrator did not enable on-hook transfer, you must

press Trnsfer again to complete the transfer. To cancel the transfer,

press EndCall.

Transfer two current calls

to each other (direct

transfer) without staying on

the line

Scroll to highlight any call on the line and press Select. Repeat this

process for the second call. With one of the selected calls highlighted,

press DirTrfr. (You might need to press more to see DirTrfr.) The two

calls connect to each other and drop you from the call.

If you want to stay on the line with the callers, use Join to create a

conference instead. For details, see the “Making Conference Calls”

section on page 26.

If you want to... Then...

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cisco ip 7912g Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cisco ip 7912g

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info