Bedienungsanleitung Cisco SOHO 91 (Seite 7 von 8) (Englisch)

605002

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

1-7

Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide

78-14783-07

Chapter 1 Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide

Congratulations! You Have Completed Setup

Step 7 Select Start/Run, and type winipcfg in the Open field of the Run window. When the IP Config window

appears, click Release, and then click Renew to release and renew the PC’s IP address.

Alternatively, open the Run window, and enter ipconfig /release to release the PC’s IP address. Then

enter ipconfig /renew to renew the IP address of the PC.

Step 8 Open a web browser on the PC, and connect to a website. If you can connect to a website, you have

completed setup.

Tip If you could not start CRWS, your PC might not be configured to obtain an IP address automatically.

You can use this information if your PC is running Microsoft Windows NT or Microsoft Windows 95,

98, or 2000. If the PC is running a different version of Microsoft Windows, refer to the documentation

that came with the PC.

1. Start the PC, and open the Control Panel.

2. Click the Network icon to display the Network window.

3. Verify that TCP/IP has been added and associated with the Ethernet adapter. TCP/IP is shown as a

cable icon in the Configuration window on Microsoft Windows 95, 98, 2000, Windows ME, and

Windows XP and as a cable icon in the Protocol window on Microsoft Windows NT. If the icon is

not visible, click Add, and add Microsoft TCP/IP.

4. To verify that the PC is configured to obtain an IP address automatically, click the TCP/IP cable

icon, and select the IP address tab in the TCP/IP Properties window. Check Obtain an IP address

from a DHCP server if it is not checked. The IP address and Subnet mask fields should be grayed

out.

5. To accept all changes and exit this window, click OK. Then click OK in the Network window.

6. If you are prompted, click Ye s to reboot the PC.

7. Return to Step 3 in the “Configure the Router” section on page 1-5.

For more information on how to configure TCP/IP, refer to the Cisco Router Web Setup Troubleshooting

Guide, which is available on Cisco.com.

Congratulations! You Have Completed Setup

If you were able to connect to a website, you have completed the cabling and setup of your router, and

you can continue to use it to access the Internet. If you need to configure more features, click the CRWS

link for the feature you need to configure, and enter configuration values for the router.

For More Information about your Router

Refer to the following documents for more information:

• Cisco 831 Router and SOHO 91 Router Hardware Installation Guide—Provides detailed cabling

and hardware information for the Cisco 836 and SOHO 96 routers.

• Cisco 800 Series Router Software Configuration Guide—Provides detailed configuration

instructions for the Cisco 800 series routers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cisco SOHO 91 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cisco SOHO 91

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info