Bedienungsanleitung Cisco spa901 (Seite 19 von 165) (Englisch)

300915

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

1-8

Linksys IP Phone Administrator Guide

Firmware Version 5.1

Chapter 1 Introducing Linksys IP Phones

Technology Background

This section provides background information about the technology and protocols used by the phone:

• Session Initiation Protocol, page 1-9

Voice Activity

Detection with Silence

Suppression and

Comfort Noise

Generation

Voice Activity Detection (VAD) with Silence Suppression is a means of

increasing the number of calls supported by the network by reducing the

required bidirectional bandwidth for a single call. VAD uses a very

sophisticated algorithm to distinguish between speech and non-speech

signals. Based on the current and past statistics, the VAD algorithm decides

whether or not speech is present. If the VAD algorithm decides speech is not

present, the silence suppression and comfort noise generation is activated.

This is accomplished by removing and not transmitting the natural silence

that occurs in normal two-way connection. The IP bandwidth is used only

when someone is speaking. During the silent periods of a telephone call,

additional bandwidth is available for other voice calls or data traffic because

the silence packets are not being transmitted across the network. Comfort

Noise Generation provides artificially-generated background white noise

(sounds), designed to reassure callers that their calls are still connected

during silent periods. If Comfort Noise Generation is not used, the caller

may think the call has been disconnected because of the “dead silence”

periods created by the VAD and Silence Suppression feature.

Configurable Dial Plan

with Interdigit Timers

Linksys IP phones have three configurable interdigit timers:

• Initial timeout (T)—Handset off hook; no digit pressed yet.

• Long timeout (L)—One or more digits pressed, more digits needed to

reach a valid number (as per the dial plan).

• Short timeout (S)—Current dialed number is valid, but more digits

would also lead to a valid number.

Report Generation and

Event Logging

Linksys IP phones report a variety of status and error reports to assist service

providers in diagnosing problems and evaluating the performance of their

services. The information can be queried by an authorized agent, using

HTTP with message-digest authentication, for instance. The information

may be organized as an XML page or HTML page.

Syslog and Debug

Server Records

Linksys IP phones support detailed logging of all activities for further

debugging. The debug information may be sent to a configured Syslog

server. Linksys IP phones provide configuration settings that determine the

type of activity/events that should be logged as, for example, a debug level

setting.

Dynamic Payload When no static payload value is assigned per RFC 1890, Linksys IP phones

can support dynamic payloads for G.726.

Call Statistics and

Reporting

The statistics collected by Linksys IP phones during normal operation

statistics are available in the Info tab. Line status is reported for each line (1

and 2). Each line maintains up to 2 calls: Call 1 and 2.

Table 1-4 Linksys Phone Features (continued)

Feature Description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cisco spa901 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cisco spa901

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info