Bedienungsanleitung Cisco spa901 (Seite 48 von 165) (Englisch)

300915

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

3-5

Linksys IP Phone Administrator Guide

Firmware Version 5.1

Chapter 3 Managing Linksys IP Phones

Localization

When entering digits in numeric mode, enter the corresponding digits from the numeric key pad. When

entering letters or symbols during alphanumeric mode, the phone shows a template of two or more

choices as you press each digit key. Scroll through the choices by pressing the same key multiple times.

To accept a symbol as input, do one of the following:

• Stop pressing the digit key for 1.5 seconds

• Pressing another digit key

• Navigate to another input field (if applicable) by pressing the UP/DOWN key, or

• Save the value by pressing the proper soft key, such save or ok

When entering an IP address, pressing the * digit inserts a dot (.), or a colon (:) if there are 3 dots entered

already.

When entering numeric, alphanumeric, or IP address values, the following additional soft keys are

available for easier editing:

• <<—Move cursor to the left by one character

• >>—Move cursor to the right by one character

• erase<—Erase the character to the left of the cursor

• clear—Clear the entire entry

Holding down the <<, >>, or erase<, soft key or any numeric keypad keys automatically repeats the

entry. If the input value is wider than the LCD can display, the SPA900 Series phone automatically

scrolls the input to the left so that you can continue to enter input. On the other hand, the SPA900 Series

phone stops accepting further input for a given field if the maximum allowed input length has been

reached for that field. For Boolean input, the SPA900 Series phone displays (y/n); pressing the soft key

toggles the current input between yes and no.

When the SPA900 Series phone displays an option, pressing the soft key either changes the input field

to the next available choice in round-robin fashion, or displays a menu of choices. For most settings, the

input value is saved once you press save or ok before exiting the edit screen for that setting.

However, there are a few exceptions where you must press save again when all the required changes

have been made to the settings so that they are saved into the configuration at the same time. These

exceptions are:

• Preferences

• Call Forward

• Network

• Speed Dialing

Localization

This section applies to the following SPA900 Series IP Phones:

• SPA922

• SPA942

• SPA962

This section describes how to localize the IP phone display language for these models, referred to in this

section as SPA9x2 phones.

SPA9x2 phones support setting an alternative language on the user display. The administrator or service

provider defines up to nine languages, in addition to English, to be made available and hosts the

dictionaries for each of the languages on the HTTP or TFTP provisioning server. Language support

follows Cisco dictionary principles.

The paragraphs describe parameters that can be defined in the SPA9x2 configuration file.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cisco spa901 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cisco spa901

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info