Bedienungsanleitung Cisco spa921 (Seite 39 von 165) (Englisch)

300769

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

2-16

Linksys IP Phone Administrator Guide

Firmware Version 5.1

Chapter 2 Getting Started

Using the Interactive Voice Response Interface

</flat-profile>

Binary format profiles contain Linksys IP phone parameter values and user access permissions for the

parameters. By convention, the profile uses the extension .cfg (for example, spa2000.cfg). The Linksys

Profile Compiler (SPC) tool compiles a plain-text file containing parameter-value pairs into a properly

formatted and encrypted .cfg file. The SPC tool is available from Linksys for the Win32 environment

and Linux-i386-elf environment. Requests for SPC tools compiled on other platforms are evaluated on

a case-by-case basis. Please contact your Linksys sales representative for further information about

obtaining the SPC tool.

The syntax of the plain-text file accepted by the profile compiler is a series of parameter-value pairs,

with the value in double quotes. Each parameter-value pair is followed by a semicolon. The following

is an example of a valid text source profile for input to the SPC tool:

Admin_Passwd “some secret”;

Upgrade_Enable “Yes”;

Refer to the LVS SPA Provisioning Guide for further details.

The names of parameters in XML profiles can generally be inferred from the Linksys IP phone

configuration web pages, by substituting underscores (_) for spaces and other control characters.

Further, to distinguish between Lines 1, 2, 3, and 4, corresponding parameter names are augmented by

the strings _1_, _2_, _3_, and _4_. For example, Line 1 Proxy is named Proxy_1_ in XML profiles.

Parameters in the case of source text files for the SPC tool are similarly named, except that to

differentiate Line 1, 2, 3, and 4, the appended strings ([1], [2], [3], or [4]) are used. For example, the

Line 1 Proxy is named Proxy[1] in source text profiles for input to the SPC.

Using the Interactive Voice Response Interface

This section describes how to read or write basic network configuration settings using the keypad on the

SPA901 IP Phone. To configure the other SPA phones, use the LCD display (see the

“Using the 900

Series LCD Display” section on page 3-1) or the administration web server (see the “Using the

Administration Web Server” section on page 2-12.

This section includes the following topics:

• Using the IVR Menu on a Linksys SPA901 Phone, page 2-16

• IVR Options, page 2-17

• Entering a Password through the IVR, page 2-19

By default, there is no password required for any of the IVR options. If the Administrator account

password is set, password authentication is required for some options.

The interactive voice response (IVR) features that are available depend on your system configuration.

A convenient quick-reference for the IVR is available at the following website:

http://www.linksys.com

Select the Products > Business > IPCommunications > Linksys Voice System > SPA9000 > IVR Quick

Reference Card link.

Using the IVR Menu on a Linksys SPA901 Phone

To use the IVR menu:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cisco spa921 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cisco spa921

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info