<Setting the Alarm Time>
1. Pull button ࠗ
M out.
The second hand will indicate the ON position.
2. Press button ࠗ
B or ࠗC to move the hour, minute
and 24H hands to the time at which the alarm is
desired to be set.
• Correction can be made one minute at a time, in
the clockwise direction, each time button ࠗ
B is
pressed.
2. • Correction can be made one minute at a time, in
the counterclockwise direction, each time button
ࠗ
C is pressed.
Correction can be made rapidly by holding
button ࠗ
B or ࠗC down.
Correct the alarm set time by moving the hands
in the closest direction to the desired alarm time.
3. Push button ࠗ
M in to the normal position.
* When setting the alarm time, be careful that AM
and PM are set correctly by referring to the 24H
hand.
<Switching Between Alarm ON and OFF>
The alarm will switch between ON and OFF each
time button ࠗ
A is pressed with button ࠗM pulled out.
<Alarm Monitor>
The alarm sound can be monitored by pressing
button ࠗ
A in the alarm 2 mode when button ࠗM is in
the normal position.
8. Use of Chronograph [CHR]
The chronograph is able to measure time up to a
maximum of 59 minutes, 59 and 19/20th seconds in
1/20th increments after which the chronograph
returns to the chronograph reset display and stops.
This chronograph is also able to measure split time.
In the chronograph mode, the hour, minute and 24H
hand as well as date indicate the current time and date.
<Explanation of Display>
Chronograph minutes: Read the function hand.
Chronograph seconds: Read the second hand.
Chronograph 1/20 seconds: The function hand will
change to the 1/20th second display when button ࠗ
B
is pressed during the stop or split display. The value
for 1/20th seconds is read at every time.
<Use of Accumulated Elapsed Time Measurement>
1. The chronograph is started and stopped by
pressing button ࠗ
A . (Starting and stopping the
chronograph can be repeated as many times as
desired.)
2. The chronograph is started and stopped by
pressing button ࠗ
C when it is stopped.
✩ A confirmation beep will sound when either the
start, stop or split operation is selected.
<Use of Split Time Measurement>
1. The chronograph is started and stopped by
pressing button ࠗ
A .
2. Pressing button ࠗ
C during measurement displays
the split time for 10 seconds. The next split time
is displayed when button ࠗ
C is pressed again
during display of split time.
3. The chronograph is reset by pressing button ࠗ
C
when it is
stopped.
* The chronograph
automatically
returns to the
measuring state
after displaying
the split time for 10 seconds.
✩ A confirmation beep tone will sound when either
the start, stop or split operation is selected.
9. Use of Timer [TME]
The timer can be set over a range of 1 to 59 minutes
in 1 minute increments. When measurement of the
set time is completed, the watch beeps for 5 seconds
indicating that the time is up. After the set time has
elapsed, the timer will automatically return to the
same set time. In the timer mode, the hour, minute
and 24H hands as well as the date indicate the
current time and date.
<Timer Setting Procedure>
Press button ࠗ
M to switch to the
timer mode [TMR].
1. Pull button ࠗ
M out.
2. Press button ࠗ
B or ࠗC to set
the timer to the desired time.
Correction can be made one
minute at a time in the
clockwise direction each time
button ࠗ
B is pressed.
Correction can be made one minute at a time in the
counterclockwise direction each time button ࠗ
C is
pressed.
The hands can be advanced rapidly by holding
button ࠗ
B or ࠗC down.
3. Push button ࠗ
M in to the normal position.
* Measurement will continue internally even
when the watch is switched to a different
mode during chronograph measurement.
Measurement will be shown continuing when
the watch is again returned to the chronograph
mode. However, it returns to the reset display
when 60 minutes have elapsed.
