14 15
[Returning to Local Time Mode After Checking Reference
Position]
• After the date and each hand has displayed the reference position, pressing button
(A) returns the watch to the local time mode. Alternatively, the watch
automatically returns to the local time mode if the crown or buttons are not
operated for two consecutive minutes.
• The reference position check is canceled when the mode is switched by pulling the
crown out to Position 1 while the reference position is displayed.
Note:
• The watch will not return to the local time mode even if button (A) is pressed if the
crown is pulled out to Position 1 or Position 2. In addition, it will not automatically
return to the local time mode after 2 minutes.
[Reference Position Correction]
• Perform steps 5 through 10 below if continuing to correct the reference position
after just having checked the reference position.
1. Pull the crown out to Position 1 (the second hand moves to the 30 seconds position
and waits).
2. Turn the crown to set the mode hand to the local time mode [L-TM].
3. Return the crown to the normal
position.
4. Press button (A) for at least 10
seconds and release when each
hand begins to move to the
reference position.
• The second hand rapidly advances
forward (clockwise rotation),
while the other hands, including
the function hand, rapidly move
forward or backward.
• The date changes by one day
when the function hand completes
four revolutions.
Position 2
<Watch when Second Hand and
Minute Hand have Shifted from
Reference Position>
