23
· When button (A) is pressed, the date & mode hand moves the alarm ON position.
· Check the position of the AM/PM hand to ensure that AM or PM is set correctly for
the local alarm time.
[NOTE]
· The watch automatically returns to the time display if none of the buttons are pressed
for about 1 minute.
2. Switching the Alarm ON and OFF
· The alarm is switched ON and OFF each time button (B) is pressed in the L-AL
mode, and the date & mode hand moves.
3. Stopping the Alarm
· The alarm tone can be stopped from sounding by pressing any of buttons (A), (B) or
(C) while the alarm tone is sounding.
4. Alarm Tone Monitor
· You can check the alarm tone by pressing button (B) for about 2 seconds in the L-
AL mode.
22
10. Seconds Correction Function (0-SET)
· This convenient function lets you synchronize the "seconds" of the main watch and sub
watch to the time (seconds) of a telephone time signal or other time service. Use this
function when the seconds of the watch are running too fast or too slow with respect to
a telephone time signal and so forth.
1. Procedure for Setting to the
"Seconds" of a Standard Clock
(1) Press button (C) until the date & mode hand moves to
the "0-SET" seconds correction function.
· The sub watch hour hand and sub watch
minute hand indicate the current time.
(2) Press button (B) in synchronization with
a standard clock or other time signal.
* The movement of the hands differs
according to the position of the second
hand on the watch.
Second
hand
Sub watch
minute hand
Sub watch hour hand
Button (B)
Button (C)
