556076
25
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
20
4.7 Error Indication
Paper end
Paper empty is detected in two steps: paper near-end and paper end. It causes the ERROR lamp to light. If
paper end is detected, refill the paper. If the paper cover is open, a paper-end is detected.
Paper cover open
During printing, do not open the paper cover. If you open the paper cover accidentally, the ERROR lamp
blinks. Confirm the paper and close the over. Printing resumes automatically.
Thermal head overheat
When you print dense characters or dark image, the head temperature rises. If the head temperature exceeds
a specified level, the printer stops printing operation and waits till the head temperature is lowered. During
waiting, the ERROR lamp blinks. When the head temperature is lowered, printing resumes automatically.
Cutter lock
If the cutter blade stops operating due to paper jam or the like, the ERROR lamp blinks. Remove the cause of
the trouble and press the FEED switch. If the blade does not move and the cover does not open yet even in
the above procedure, follow the procedure in section 4.4 to open the paper cover.
Black Mark detection error (in Black Mark mode)
When no Black Mark can be detected even if a certain amount of paper feed is carried out for Black mark
detection, a Black Mark detection error occurs. If black detection continues more than the specified period,
a No Paper condition is assumed and the same error as No Paper is indicated.
Lighting and blinking status of each error including the above is shown below.
Status POWER Lamp ERROR Lamp Buzzer
Paper-end Lights Lights O
Paper near-end Lights Lights
Cover open error Lights Light O
Cover open error *1 Lightss O
Cutter lock error Lights O
Head overheat error Lights
Memory check error Lights
Low voltage error Lights
High voltage error Lights
Sum check error
Macro execution Lights
wait *2
Black Mark detection Lights O
error
*1: When the printer is printing.
*2: The ERROR lamp may blink even in the execution of macro function.
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Citizen CT-S300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info