Protection cover
HDi 135 and 140 engines
Remove the protection cover by
rst unclipping point 1, then 3 and
4. Detach point 2 by pulling towards
you, then lift.
To reposition the protection cover,
attach point 2 rst. Lower the cover,
keeping it centred. Clip points 1 and
4, pushing vertically and slightly
rearwards. Clip point 3 pushing
down vertically.
HDi engines are of a highly technical nature.
All maintenance and repairs require specic qualications
which only your CITROËN Dealer can guarantee.
Bleeding of water from the diesel
fuel lter
To be bled on a regular basis (at
every oil change).
To evacuate the water, slacken the
bleed screw or the water in diesel
fuel sensor, which is located at the
base of the lter, until water ceases
to ow out.
Then retighten the bleed screw or
the water in diesel fuel sensor.
DIESEL INJECTION
EQUIPMENT
Wear of brake discs, brake
pads and brake drums
The rate of wear of the brake pads
depends on the use of your vehicle
(urban use, frequent stops), and on
your style of driving or the type of
journey.
For information on checking the
discs and drums for wear, contact a
CITROËN dealer.
After washing the vehicle,
brake progressively to dry out
the brake linings.
