Bedienungsanleitung Citronic MPCD-4 (Seite 7 von 47) (Englisch)

34400

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

12. Pitch selection LEDs

These LEDs give a visual indication of the pitch range that is currently selected as follows:

• ±4% - The % (11) button will be illuminated red

• ±8% - The % (11) button will not be lit and the 8% LED will be illuminated in red

• ±16% - The % (11) button will not be lit and the 16% LED will be illuminated in blue

• ±100% - (CD-A ONLY) The %, 8% and 16% will be illuminated

13. Time Select Button

The time select function will switch the time value on the LCD display from Elapsed play time, track remaining

time and total remaining time. Note: Total remaining time is not available on MP3 discs.

The Time button is dual function, it will also activate relay play mode, see section on activation further in the

is manual.

14. SGL/CTN Button

This function allows the user to select single play (when the track reaches the end the CD will stop) or

continuous play (when the track ends the next track on the CD will play in order)

15. FL Tube Display

This highly visible display, gives information on selected feature and track/CD information See “Display

Section” for more detail.

16. Pitch Slider

This slider is used to set the pitch of the playing CD. To activate the slider press (9) the slider can then be

used to adjust the pitch/BPM of the track. The amount of pitch adjustment is determined by the pitch range

select button (11)

17. Seamless Loop IN Button

IN – This button has two functions. It can be used to set a CUE point on the fly, press once at the desired

position to set an instant CUE point, this also sets the beginning of the loop feature.

18. Seamless Loop OUT Button

OUT – This button when pressed selects the end point for the seamless loop. Press once to set the end point

the loop will then begin from the IN point and continuously loop until the OUT button is pressed once again to

exit the loop feature

19. Reloop Button

RE-LOOP – This button is used to re-enter the seamless loop and can be pressed at anytime as long as the

loop created is on the same disc. This button can also be used to create a stutter when pressed repeatedly.

20. Memory Button

This button allows the user to program up to 3 cue points or 3 loops to the 3 ‘Memory Bank Buttons’ (21) the

loops or cue points can be recalled at any time even when the disc has been removed and reloaded at a later

time. Pressing and holding this button for 4 seconds will save the cue/loop points into the IMS memory, so

when the disc is next inserted the cue/loop points will be recalled.

21. Memory Bank

These 3 buttons are used to store 3 cue points if the cue point is the beginning of an active loop the memory

bank will save the loop information. These buttons can also be used to stutter the music, pressing repeatedly

will return the track to its cue point but remain in play mode.

22. BPM Button

This button will switch between Auto and Manual BPM.

23. TAP button

Use this button to manually TAP the BPM of a track. This is particularly useful when a track has a weak or no

continuous beat.

24. Scratch Button

This button will activate the scratch mode; this is available for both CD and MP3. The button will illuminate

Blue when active. Using the jog wheel (2) move in the desired direction to produce the scratch, when the jog

wheel is not moving normal play will resume.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Citronic MPCD-4 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info