Bedienungsanleitung Citronic MPCD-5 (Seite 7 von 15) (Englisch)

455887

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

10. TRACK / FOLDER KNOB - This knob has three functions:

a. You can use it to select the next or previous track/folder by turning the knob

forwards or backwards.

b. Holding down and turning the knob forwards or backwards will rapidly skip through

the tracks/folders on your CD/USB by 10 tracks per click.

c. Press track knob to read the ID3 tags on the file name. Switch between: File name

/ Title name / Artist / Bit rate on the LCD display.

11. SEAMLESS LOOP BUTTONS:

a. IN BUTTON – Pressing the IN button sets a CUE POINT without music interruption.

This button is also used to set the starting point of a SEAMLESS LOOP.

b. OUT BUTTON - This button is used to set the ending point of a LOOP. A LOOP is

started by pressing the IN button to select the starting point and the OUT button to

set the LOOP ending point. The LOOP will continue to play until the OUT button is

pressed once again.

c. RELOOP BUTTON - If a SEAMLESS LOOP has been made, but the player is not

actively in SEAMLESS LOOP mode.

i. Pressing the RELOOP button will instantly reactivate the seamless loop

mode. To exit loop, press the OUT button. LOOP will appear in the LCD

display when the RELOOP function is available.

ii. You can fine tune the SEAMLESS LOOP by holding the RELOOP button and

using the jog wheel to set the exact OUT point. Press RELOOP again to set

the IN point.

12. RELAY BUTTON – Set both sides of the player to single mode and switch the RELAY

function on. Alternate tracks will be plated from both players until the relay function is

deactivated. You can always put a new music source in the device that is waiting in

standby mode to create an endless program.

13. PITCH (KEY) LOCK BUTTON - This button turns on or turns off the PITCH LOCK

function. This function allows you to use the PITCH SLIDER to speed up or slow down

playback speed without altering the tonal pitch of the track.

14. SEARCH BUTTONS – These search buttons allows you to quickly scan forwards and

backwards through the track. The search speed will actively change depending on how

long you hold down the button.

15. FOLDER BUTTON – Use the FOLDER button to switch between FOLDER and TRACK (see

search options above - 10. “TRACK KNOB” When the LED is lit the player is in FOLDER

search mode when it is not lit it is in TRACK search mode.

NOTE: Hold the FOLDER button down for 2 seconds to activate and REPEAT function

16. PLAY/PAUSE BUTTON – Pressing the PLAY/PAUSE button once will instantly start the

track. Pressing this button again will PAUSE the current track.

17. CUE BUTTON – Can be used in a number of ways:

a. Pressing the CUE button during playback immediately stops the current track and

returns the music to the last set cue point.

b. In pause mode pressing and holding the CUE button plays the track from the last

set CUE point. Releasing CUE button will return the track to the last set CUE point.

c. Pressing and holding the Cue will start the track. If PLAY/PAUSE button is pressed

during this time the track will continue to play when CUE button is released.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Citronic MPCD-5 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info