Bedienungsanleitung Citronic MPSD-1 (Seite 5 von 15) (Englisch)

455894

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

17. CUE BUTTON –Pressing the CUE button during playback immediately pauses playback and returns the

track to the last set cue point. The CUE LED will glow when the unit is in cue mode. The LED will also flash

every time a new CUE POINT is set. The CUE button can be held down to momentarily play the music.

When you release the CUE button it instantly returns to the CUE POINT. You can also tap the CUE button

to create a STUTTER EFFECT.

18. JOG WHEEL – This jog wheel serves 3 functions depending on the mode you are working in.



The wheel works as a pitch bend during Playback. Turning the wheel clockwise can increase the pitch

percentage up to 100%, and turning the wheel in the counterclockwise direction can decrease the pitch

percentage down to -100%. The pitch bend will be determined on how long you turn the jog wheel

continuously.



The jog wheel acts as a slow frame search (1/75 sec) control when the music is not playing but either paused

or set to a cue point. To set a new cue point, spin the wheel then press PLAY or IN when you have

determined the proper position. Press CUE to return to the “CUE POINT”.



If the search function is active, you will be able to search at a higher speed through all the tracks.

19. POWER SWITCH button – It is used to switch the power on/ standby. When power cord plug into the rear

socket to be the STANDBY mode, all LED are off but STANDBY LED.

(a) In the STANDBY mode, press power button to POWER ON,” Please insert memory device” is

displayed in the LCD.

(b) In the POWER ON mode, press and hold the power button more than 2sec. to standby.

20. TEMPO LOCK BUTTON – This button is used to choose the tempo lock mode and the pitch control mode.

Tempo lock mode allows speeding up or slow down playback speed without altering the tonality of music.

21. SGL/CTN BUTTON – You can choose between “single track mode” and “continuous play”.

 Continuous play:

the complete memory device will be played without interruption. (mostly used in pubs)

 Single track:

player stops at the end of each track and waits at the beginning of the next track. (mostly

used by deejays) Push the SGL/CTN button for more than 1 second to switch between normal and “auto

cue” mode. See basic operation for more information.

22. POWER CONNECTOR – Plug in power adapter here. It is a switching adapter to suitable to each voltage.

23. FADER START – This connection allows two players to be linked for relay play. This can also be

connected to a mixing board that supports automatic fader start.

24. AUDIO OUTPUTS –Output for the audio signals is from each player. Use the supplied cinch/cinch cables to

connect these outputs to the CD/line inputs of your mixing unit.

NTR

AND F

CONTROL UNIT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Citronic MPSD-1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info