Bedienungsanleitung Clarion adx 5655 rz (Seite 17 von 26) (Englisch, Französisch, Spanisch)

165971

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

16 ADX5655z

280-7452-00

Other Handy Functions

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection

display.

2. Press Right button ¥ or Left button % to se-

lect “ANA SENS”.

3. Press Up button & or Down button * to set

the sensitivity of the spectrum analyzer.

You can choose one of “LOW”, “MID” or

“HIGH” for the sensitivity of the spectrum ana-

lyzer.

4. Press ADJ button

to return to the previous

mode.

Setting the speed of the spectrum

analyzer display

∗ The factory default setting is “HIGH”.

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection

display.

2. Press Right button ¥ or Left button % to se-

lect “ANA SPD”.

3. Press Up button & or Down button * to set

the speed of the spectrum analyzer display.

You can choose one of “LOW”, “MID” or

“HIGH” for the speed of the spectrum analyzer

display.

4. Press ADJ button

to return to the previous

mode.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed for radio or TV stations

and CDs. The numbers of titles that can be

entered for each mode are as follows.

1. Press FUNC button 7 to select the mode you

want to enter a title. (radio, CD, CD changer or

TV)

∗ Titles cannot be entered for MDs with this unit.

2. Select and play a CD or a CD in the CD changer,

or tune to an appropriate TV or radio station.

3. Press DISP button 3 and display the title.

Setting the clock

1. Press and hold ADJ button # for 1 second or

longer to switch to the adjustment selection

display.

2. Press Right button ¥ or Left button % to se-

lect “CLOCK”.

3. Press ENT button @.

4. Press Right button ¥ or Left button % to se-

lect the hour or the minute.

5. Press Up button & or press Down button *

to set the correct time.

∗ The clock is displayed in 12-hour format.

Press ENT button

to store the time into memory.

Press ADJ button # to return to the previous mode.

Note:

• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the car’s

battery or take out this unit, the clock is reset. While

setting the clock, if another button or operation is

selected, the clock set mode is canceled.

Switching the spectrum analyzer

display patterns

You can select one out of 4 patterns or set it to

off.

∗ The factory default setting is “PATTERN 1”.

Each time you press SPE-ANA button 4, the

spectrum analyzer display pattern changes in the

following order:

PATTERN 1 ➜ PATTERN 2 ➜ PATTERN 3 ➜

PATTERN 4 ➜ PATTERN 5 ➜ PATTERN 6 ➜

PATTERN 7 ➜ PATTERN 8 ➜ PATTERN 9 ➜

OFF ➜ PATTERN 1...

Note:

The spectrum analyzer display is unavailable dur-

ing these operations below;

• Seek tuning and auto store in radio mode.

• Mute or pause.

• When “NO DISC” or an error message appears

in the display.

Setting the sensitivity of the spec-

trum analyzer

∗ The factory default setting is “MID”.

CD changer mode Number of titles

CDC655z connected 60 titles

CDC655Tz connected 100 titles

CDC1255z connected 50 titles

Mode Number of titles

Radio mode 30 titles

CD mode 100 titles

TV mode 15 titles

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion adx 5655 rz Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info