Bedienungsanleitung Clarion adx 5655 rz (Seite 23 von 26) (Englisch, Französisch, Spanisch)

165971

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

22 ADX5655z

280-7452-00

Manual tuning

There are 2 ways available: Quick tuning and step

tuning.

When you are in the step tuning mode, the

frequency changes one step at a time. In quick

tuning mode, you can quickly tune the desired

frequency.

1. Press BAND button ! and select the desired

band (TV1 or TV2).

∗ If “MANU” is not lit in the display, press and

hold BAND button ! for 1 second or longer.

“MANU” lights in the display and manual tuning

is now available.

2. Tune into a station.

● Quick tuning:

Press and hold Right button ¥ or Left button

% for 1 second or longer to quickly tune up

and down to a desired station.

● Step tuning:

Press Right button ¥ or Left button % to

manually tune to a station, one channel at a

time.

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your favorite

TV stations and store them in memory for later

recall.

1. Press BAND button ! and select the desired

TV band (TV1 or TV2).

2. To recall a stored TV station, press the desired

Preset button 1 to select that station.

∗ Press and hold one of the Preset buttons 1

for 2 seconds or longer to store the current sta-

tion into the preset memory.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of the Preset buttons 1

for 2 seconds or longer to store the current

station to that preset memory.

TV Operations

Auto store

Auto store selects 6 TV stations automatically and

stores each one into a preset memory.

If there are not 6 stations with good reception,

stations previously stored in memory remain and

only the strong stations are stored into memory.

1. Press BAND button ! and select the desired

TV band (TV1 or TV2).

2. Press and hold AS button 5 for 2 seconds or

longer. The stations with good reception are

automatically stored to the Preset buttons 1.

Preset scan

Preset scan allows the user to view each preset

position before it automatically advances to the

next preset. This function is useful for searching

for a desired TV station in memory.

1. Press PS button 5.

2. When a desired station is found, press PS

button 5 again to remain tuned to that sta-

tion.

Note:

• Do not press and hold PS button

for 2 seconds

or longer. Doing so will trigger the auto store

function and start storing stations into memory.

Setting the receiver for Diversity

tuning

You can change the reception setting for the TV

antenna connected to the TV tuner.

∗ The factory default setting is “ON”.

1. Press and hold ADJ button # for 1 second or

longer to switch to the adjustment selection

display.

2. Press Right button ¥ or Left button % to se-

lect “TV DIVER”.

3. Press Up button & to set to “ON” or Down

button * to set to “OFF”.

ON:

In the “ON” position, the TV tuner emphasizes

the visual signal by choosing the antenna with

the best signal strength. This requires more

than one antenna on the vehicle.

OFF:

Set the TV Diver adjustment to the “OFF” po-

sition when only using one antenna on the

vehicle.

4. Press ADJ button # to return to the previous

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion adx 5655 rz Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info