659104
1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Installation/Owner's Manual
CC-6300E
Wide Angle Compact Color CMOS Camera
Thank you very much for your purchase of this Clarion product.
To get the best performance from and to use this device effectively, first read this Installa-
tion/Owner’s Manual thoroughly and then install the device correctly and safely.
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2014 : Clarion Co., Ltd.
SAFETY PRECAUTIONS
Always follow the safety precautions below when installing the device.
WARNING
This device is a rear view camera intended for vehicle installation. Do not use it else-
where except when mounted on a vehicle.
If not, this may result in fuming, fire, electric shock or injury.
Do not attempt to disassemble or modify the unit.
Never disassemble, modify or cut the cable cover to draw power from other devices. Doing so may re-
sult in accident, fire, electric shock or other malfunction.
Do not cut the camera cable.
Moisture or water may get inside the camera through the damaged part, resulting in malfunction or fire.
Never use the vehicle's safety-related parts* for mounting or grounding the device.
* Nuts and bolts in the steering system, seat rails, brake system, tanks, etc.
Doing so may result in loss of control, fire or traffic accident.
Never drive while looking at the monitor screen only.
The monitor is an auxiliary equipment for checking obstacles and so on but the field of view is limited.
As the actual distance may differ from your perception, make sure you conduct a safety check visu-
ally while driving. Failure to do so may result in a person or object in the camera's blind spot to be hit,
causing a serious accident.
Discontinue use in the event of malfunction or abnormality.
If there is no image, or when there is smoke or strange odors, stop using the camera immediately and
make sure you consult your dealer. Continued use may result in an accident, fire or electric shock.
Do not put water or foreign objects inside the device.
In the event water or foreign objects get inside the device, and when there is smoke or strange odors,
stop using the camera immediately and make sure you consult your dealer. Continued use may result
in an accident, fire or electric shock. Make sure you consult your dealer.
Before making connections, disconnect the negative battery terminal.
Failure to do so may result in electric shock or injury due to short-circuit.
Keep the cables away from hot areas.
The covering of the cables may melt, causing a short-circuit and resulting in an accident or fire. Pay
particular attention to the wiring inside the engine room.
Engage the services of a professional technician to connect and disconnect.
Failure to do so may result in an accident or fire. Contact the dealer where the device was purchased.
After installation and wiring work, check the operation of the car's electrical compo-
nents*.
* Brakes, lights, horn, hazard lamps, blinkers, etc.
Malfunctioning equipment may lead to fire, electric shock or traffic accident.
When drilling holes and installing the device on the vehicle side, check the positions of
the pipes, tanks, electrical wiring etc. to make sure there is no interference or contact.
Damage to the pipes etc. may lead to fire or malfunction.
Lay and consolidate the cables so that they do not obstruct the operations.
When the cables are wrapped around the steering wheel, shift lever, brake pedal etc., this may result in
accidents.
Reverse the car at a slow speed.
The image on the rear monitor uses a wide angle lens. As the actual distance differs from your percep-
tion, reversing at a high speed may risk collision with people and objects, resulting in a serious acci-
dent.
CAUTION
This device is a vehicle-mounted rear view camera. Do not use the device underwater
Doing so may result in smoke, fire, electric shock or injury.
After installation, do not hit or subject this device to strong impacts.
The mounting angle of the camera may change, or the screen may not appear normally. Malfunctions
and damages may also result from the impacts, causing fire and electric shock. Do not subject the
camera to strong impacts as it is a precision machine. Malfunctions and damages may occur, resulting
in fire and electric shock.
Inspect the installation screws occasionally and tighten them if they are loose.
If the screws are loose, the device may become detached and fall off, hitting a passer-by and causing
an accident.
Follow the instructions in the manual when mounting and connecting the device.
Incorrect connection may result in fire or accident.
Be sure to use the accessories and specified parts.
Using components other than those specified may lead to damage of the parts inside the device or the
inability to secure them firmly, resulting in them becoming detached and leading to an accident or mal-
function.
After wiring the various cords, secure them with clamps and/or insulating tape.
If the cables come into contact with the vehicle side, they will fray and short-circuit, leading to an ac-
cident or fire.
CAUTION
Use protective tubing or insulating grommet when making a hole in the vehicle side to
route the cables.
If the cables come into contact with the openings, they will fray and short-circuit, leading to an accident
or fire.
If a hole is made in the vehicle side to mount the device or route the cables, seal the
gap in the hole and the gap between the hole and the cable with silicon adhesive or
something similar.
If exhaust gas or water gets inside the vehicle through the gap, it may result in an accident.
Route the cables so that they do not get caught in the vehicle side, screws, seat rails or
other moving parts.
Damaged or short-circuited cables may result in an accident, electric shock or fire.
When mounting the camera outside the car, make sure it is mounted within the range
stipulated under the law.
If the screws in the vehicle side are used to mount the device, be sure to tighten them
securely.
Loose screws may result in an accident or malfunction.
PRECAUTION
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to consult the dealer or
an experienced radio/ TV technician for help.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTUR-
ER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.
PACKAGE CONTENTS
This device consists of the following components.
In the event of any defect, contact the retailer where it was purchased.
1
Main camera unit ................................................................................................................... 1
2
Installation/Owner’s Manual ................................................................................................... 1
Accessory bag ����������������������������������������������������������������������������������������������������������������������������������1
3
Mounting bracket ................................................................................................................... 1
4
Hexagon head bolts with built-in washer (M3 mm x 6 mm)
(for installing on the main unit) ................................................................................................ 2
5
Hexagon head bolts with built-in washer (M3 mm x 15 mm)
(for installing on the vehicle side) ............................................................................................ 2
6
Flanged nuts (M3 mm) (for installing on the vehicle side) ......................................................... 2
7
Grommet ............................................................................................................................... 1
SPECIFICATIONS
Power Supply Voltage : DC5V - 9.5V
Current Consumption : 100mA or less
Image : True image
Image Sensor : 1/3.6 inch color CMOS
Image Angle : Horizontal approx. 162°/ Vertical approx. 131°
S/N Ratio : 36dB & above (AGC-ON)
Weight : 72g (0.16lbs) (including the cable and mounting bracket)
External Dimensions of Main Unit : 23.4mm (W) x 23.4mm (H) x 23.5mm (D)
59/64” (W) x 59/64” (H) x 59/64” (D)
Cable Length : 0.5 m (1.64 ft)
23.4 mm
23.4 mm
23.5 mm
36.5 mm
Declaration of conformity
We Clarion declares that the product CC-6300 is following the provisions of Directive
2014/30/EU and Directive 2011/65/EU.
Authorized Representative
Clarion Europe S.A.S.
244 rue du Pré à Varois, 54670 Custines, France
TEL +33 3 83 49 44 00 FAX +33 3 83 24 17 62
Printed in Japan 2016/7
CC6300E 274-0614-01
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clarion CC6300E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info