Bedienungsanleitung Clarion CJ-981E (Seite 5 von 15) (Englisch)

473648

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

CJ-981E 7

English

4. OPERATIONS

Adjusting the Image Quality

The CJ-981E is equipped with functions to allow

adjustment of luminance (BRIGHT), color tone

(HUE), color saturation (COLOR), and screen

brightness (DIMMER) in each of the screen

modes, thus letting you view the image under

optimum conditions.

∗ In “RGB” mode, only luminance (BRIGHT) and

screen brightness (DIMMER) controls are

supported.

The screen brightness (DIMMER) function can be

adjusted separately for the vehicle’s parking lamp

switch positions.

The Dimmer’s default settings are as follows:

• Day (vehicle’s parking lamp switch OFF): +29

• Night (vehicle’s parking lamp switch ON): 0

1. Press the [FUNC] button, and switch to the

“CAM” mode.

• This adjustment can also be performed in

the “VTR” or “RGB” mode.

2. Hold the [MODE] button depressed for about

1 second to display the setting adjustment

menu screen.

3. Use the [z] and [w] buttons to select the

desired adjustment item (BRIGHT, HUE,

COLOR, DIMMER).

4. Use the [Å] and [Î] buttons to adjust the

setting as desired.

• To continue setting other items, use the

[z] and [Î] buttons to select the desired

item.

5. Hold the [MODE] button depressed for about

1 second to return to the “CAM” mode

screen.

Setting Item

BRIGHT

(luminance)

HUE (color tone)

COLOR

(saturation)

DIMMER (screen

brightness)

– (

ÅÅ

Å)

Darker

Redder

Less

Darker

+ (

ÎÎ

Î)

Lighter

Greener

Lighter

• When in the “VTR” mode, the screen will

change to step 2 of the following topic

“Selecting VTR Playback Mode (NTSC/

PAL).”

Selecting VTR Playback Mode

(NTSC/PAL)

1. Perform steps 1-5 of the previous topic

section “Adjusting the Image Quality,” and

display the NTSC/PAL setting screen.

2. Use the [z] or [w] button to highlight the

desired playback mode (“NTSC” or “PAL”).

3. Hold the [MODE] button depressed for about

1 second to return to the “VTR” mode.

Setting the Camera Function

(CAM TYPE)

The zoom function can be set only when using a

CC-2000 series camera equipped with zoom

function. Set this item only after confirming your

camera’s type and specifications.

∗ Default setting is “ZOOM TYPE” for a camera

with zoom lens.

1. Press the [FUNC] button and switch to the

“CAM” mode menu.

• The screen will be fixed at the full wide

(F.WIDE) setting.

2. Press the [MODE] button to switch to the

“CAM TYPE” setting menu.

Each time the [MODE] button is pressed, the

menu alternates in the following order: “CAM”

➜ “MARKER” ➜ “CAM TYPE” … ➜ “CAM”.

3. Use the [z] or [w] button to highlight the

desired camera type:

• A [ZOOM TYPE]: for cameras equipped

with zoom function

• B: for cameras w/o zoom function.

4. Press the [MODE] button to return to the

“CAM” mode screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CJ-981E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info