Bedienungsanleitung Clarion CMD5 (Seite 26 von 38) (Englisch)

580426

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Sirius Satellite Operations

CMD5

English

Switching the display

Each time you press the [DISP] button, the item

changes as following order:

Channel name and band/channel number

➜ category name and band/channel

number ➜ title and artist name ➜ radio text

and band/channel number ➜ clock display

➜ channel name and band/channel

number...

Notes:

• The Operation status indication of the source unit

displays the abbreviated channel name for 2

seconds when a station is selected before

returning to the previous display mode.

• Scrolling starts when the channel name or other

text has been displayed for 2 seconds. When

scrolling finishes, the first text display appears. To

start scrolling again, press and hold the [DISP]

button for 1 second or longer.

Channel selection

Channels are selected with the following buttons.

• The [E] or [e] button

• The [DIRECT] buttons

• The [CAT] button

* For details, see the following operation

descriptions.

Note:

• The audio output is muted and other button

operations are not accepted during channel

selection.

Tuning

There are 2 types of tuning modes available,

seek tuning and preset tuning.

Seek tuning

Only channels that can be received are selected

while channels without broadcasts and channels

not covered by the contract are automatically

skipped.

1. Press the [E] or [e] button. The receiver

seeks the next available channel below or

above the current channel.

2. Press and hold the [E] or [e] button. The

receiver moves to seek channels below or

above the current channel. If the channel

found when either button is released is

available that channel is received. Otherwise,

seeking continues until an available channel

is found.

Recalling a preset channel

A total of 18 SIRIUS channels can be stored (6-

SR1, 6-SR2 and 6-SR3). This allows you to

select your favorite SIRIUS channels and store

them in memory for later recall.

1. Press the [SAT] button and select the desired

SIRIUS band (SR1, SR2 or SR3).

2. To recall a stored SIRIUS channel, press the

desired [DIRECT] button to select that

channel.

* Press and hold one of the [DIRECT] buttons for

2 seconds or longer to store the current

channel into preset memory.

Manual memory

1. Select the desired channel with seek tuning or

preset tuning.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

channel into preset memory.

Notes:

• When the name of a channel stored in memory is

changed by a broadcasting channel, the display

may show a channel name that differs from the

stored name.

• A channel stored in memory may be discontinued

at the option of the broadcasting channel.

Category selection function

Sirius Satellite allows you to select broadcast

channel category (contents).

Receiving channels selected by

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMD5 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CMD5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info