Bedienungsanleitung Clarion CMD5 (Seite 30 von 38) (Englisch)

580426

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

CMD5

English

CD Changer Operations

CD changer functions

When an optional CD changer (additional

DCZ625 CeNET changer required) is connected

through the CeNET cable, this unit controls all

CD changer functions. This unit can control a

total of 2 changers.

Press the [DISC] button to select the CD changer

mode to start play. If 2 CD changers are

connected, press the [DISC] button to select the

CD changer for play.

* If “NO MAG” appears on the display, insert the

magazine into the CD changer. “D-CHECK”

appears on the display while the player loads

(checks) the magazine.

* If “NO DISC” appears on the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

Note:

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

CAUTION

Depending on the recording format, CD-ROM

discs may not play properly.

Pausing play

1. Press and hold the [ ] button for 1 second

or longer to pause play. “PAUSE” appears on

the display.

2. To resume CD play, press and hold the [ ]

button for 1 second or longer again.

Selecting a track

● Track-up

1. Press the [E] button to move ahead to the

beginning of the next track.

2. Each time you press the [E] button, the track

advances ahead to the beginning of the next

track.

● Track-down

1. Press the [e] button to move back to the

beginning of the current track.

2. Press the [e] button twice to move to the

beginning of the previous track.

Fast-forward/fast-rewind

● Fast-forward

Press and hold the [E] button for 1 second or

longer.

● Fast-rewind

Press and hold the [e] button for 1 second or

longer.

Selecting a CD

1. Press the [mDISCo] button to select the

desired disc.

* If a CD is not loaded in a slot of magazine,

pressing the [mDISCo] button can not work.

Scan play

Scan play locates and plays the first 10 seconds

of each track on a disc automatically. This

function continues on the disc until it is canceled.

* The scan play is useful when you want to select a

desired track.

1. Press the [SCAN] button.

2. To cancel the scan play, press the [SCAN]

button again.

Disc scan play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the

currently selected CD changer. This function

continues automatically until it is canceled.

* Disc scan play is useful when you want to select a

desired CD.

1. Press and hold the [SCAN] button for 1

second or longer.

2. To cancel disc scan play, press the [SCAN]

button again.

Repeat play

Repeat play continuously plays the current track.

This function continues automatically until it is

canceled.

1. Press the [REPEAT] button.

2. To cancel repeat play, press the [REPEAT]

button again.

Disc repeat play

After all the tracks on the current disc have been

played, disc repeat play automatically replays the

current disc over from the first track. This function

continues automatically until it is canceled.

1. Press and hold the [REPEAT] button for 1

second or longer.

2. To cancel disc repeat play, press the

[REPEAT] button again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMD5 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CMD5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info