Bedienungsanleitung Clarion CMD5 (Seite 15 von 38) (Holländisch)

580426

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

CMD5

English

Radio Operations

Changing the reception area

This unit is initially set to USA frequency intervals

of 10 kHz for AM and 200 kHz for FM. When

using it outside the USA, the frequency reception

range can be switched to the intervals below.

Setting the reception area

* All station preset memories are lost when the

reception area is changed.

1. Press the [AM/FM] button and select the

desired radio band (FM or AM).

• U.S. standard (initial setting for US model)

2. While pressing the [DISP] button, press and

hold the number “1” of the [DIRECT] buttons

for 2 seconds or longer.

• Other countries (new setting)

3. While pressing the [DISP] button, press and

hold the number “2” of the [DIRECT] buttons

for 2 seconds or longer.

• Europe standard (initial setting for Europe

model)

4. While pressing the [DISP] button, press and

hold the number “3” of the [DIRECT] buttons

for 2 seconds or longer.

Listening to the radio

1. Press the [AM/FM] button to select the radio

mode. The frequency appears on the display.

2. Press the [AM/FM] button to select the radio

band. Each time the button is pressed, the

radio reception band changes in the following

order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [E] or [e] button to tune in the

desired station.

Mute

Use this function to turn off the sound

immediately.

1. Press the [ ] button. The sound turns off

and “MUTE” appears on the display.

2. Press the [ ] button again to cancel the

mute mode.

Tuning

There are 3 types of tuning modes available,

seek tuning, manual tuning and preset tuning.

Seek tuning

1. Press the [AM/FM] button and select the

desired band (FM or AM).

* If “MANU” is lit on the display, press and hold

the [AM/FM] button. “MANU” on the display

goes off, and seek tuning is now available.

2. Press the [E] or [e] button to automatically

seek a station.

When the [E] button is pressed, the station is

sought in the direction of higher frequencies;

if the [e] button is pressed, the station is

sought in the direction of lower frequencies.

Manual tuning

There are 2 manual tuning methods available:

Quick tuning and step tuning.

When you are in the step tuning mode, the

frequency changes one step at a time. In the

quick tuning mode, you can quickly tune the

desired frequency.

1. Press the [AM/FM] button and select the

desired band (FM or AM).

* If “MANU” is not lit on the display, press and

hold the [AM/FM] button. “MANU” is lit on the

display and manual tuning is now available.

2. Tune in a station.

● Quick tuning

Press and hold the [E] or [e] button for 1 second

or longer to tune in a station.

● Step tuning

Press the [E] or [e] button to manually tune in a

station.

U.S.

standard

Other

countries

Europe

standard

Frequency

spacing

10 kHz 9 kHz 9 kHz

Frequency

range

530 to

1,710 kHz

531 to

1,629 kHz

531 to

1,602 kHz

Frequency

spacing

200 kHz 50 kHz 50 kHz

Frequency

range

87.9 to

107.9 MHz

87.0 to

108 MHz

87.5 to

108 MHz

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMD5 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CMD5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info