Bedienungsanleitung Clarion CMD6 (Seite 15 von 38) (Englisch)

580427

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

English

15 CMD6

Radio Operations

Changing the reception area

This unit is initially set to USA frequency intervals

of 10 kHz for AM and 200 kHz for FM. When

using it outside the USA, the frequency reception

range can be switched to the intervals below.

Setting the reception area

* All station preset memories are lost when the

reception area is changed.

1. Press the [AM/FM] button and select the

desired radio band (FM or AM).

2. Press the [OPTION] button.

3. Press the [X] or [V] button to select “TUN

AREA”.

•U.S. standard (initial setting for US model)

4-1. Turn the [UP/DOWN] knob to select “U”.

• Other countries (new setting)

4-2. Turn the [UP/DOWN] knob to select “K”.

• Europe standard (initial setting for Europe

model)

4-3. Turn the [UP/DOWN] knob to select “E”.

5. Press and hold the [ENTER] button to store

the selecting.

Listening to the radio

1. Press the [AM/FM] button and select the

radio mode.

2. Press the [AM/FM] button and select the

radio band. Each time the button is pressed,

the radio reception band changes in the

following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

Mute

Use this function to turn off the sound

immediately.

1. Press the [ ] button. The sound turns off

and “MUTE” appears on the display.

2. Press the [ ] button again to cancel the

mute mode.

Tuning

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

Seek tuning

1. Press the [AM/FM] button and select the

desired band (FM or AM).

2. Press the [X] or [V] button to automatically

seek a station.

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

∗ If “MANU” is not lit in the display, press and hold

the [AM/FM] button (1 sec.).

● Quick tuning

Press and hold the [X] or [V] button (1 sec.) to

tune in a station.

● Step tuning

Press the [X] or [V] button to manually tune in

a station.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2,

6-FM3, 6-AM) exists to store individual radio

stations in memory.

1. Press the [AM/FM] button and select the

radio band.

2. Press the [MENU] buton.

3. Turn the [UP/DOWN] knob to select the

desired preset station.

4. Press the [ENTER] button to recall the stored

frequency.

Note:

∗ After the band selecting, you can also turn the

[UP/DOWN] knob to select a desired preset

station.

Manual memory

1. Select the desired station with seek tuning or

manual tuning.

2. Press the [MENU] button

3. Turn the [UP/DOWN] knob to select a

desired station.

4. Press and hold the [ENTER] button to store

the current station into preset memory.

U.S.

standard

Other

countries

Europe

standard

Frequency

spacing

10 kHz 9 kHz 9 kHz

Frequency

range

530 to

1,710 kHz

531 to

1,629 kHz

531 to

1,602 kHz

Frequency

spacing

200 kHz 50 kHz 50 kHz

Frequency

range

87.9 to

107.9 MHz

87.0 to

108 MHz

87.5 to

108 MHz

CMD6_ENG.book Page 15 Friday, February 20, 2009 10:51 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMD6 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CMD6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info