Bedienungsanleitung Clarion CMD6 (Seite 23 von 38) (Englisch)

580427

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

English

23 CMD6

Operations Common to Each Mode

● Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [ENTER] button.

3-2. Press the [X] or [V] button to select the

hour or the minute.

3-3. Turn the [UP/DOWN] knob to set the

correct time.

∗ The clock is displayed in 12-hour format.

3-4. Press the [ENTER] button to store the time

into memory.

Note:

• You cannot set the clock when it is displayed

with only the ignition on. If you drain or remove

the boat’s battery or take out this unit, the clock is

reset. While setting the clock, if another button or

operation is selected, the clock set mode is

canceled.

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “9”.

(Adjustment level: 1 to 10)

2-1. Select “CONTRAST”.

3-1. Turn the [UP/DOWN] knob to adjust the

contrast.

● Displaying the settings

The number of indicator of this unit decreases,

you can see the state of current settings at any

operation mode.

2-1. Select “SETTINGS”.

3-1. Turn the [UP/DOWN] knob to display the

state of current settings.

∗ When the setting is selected, after 1 second

the current state will be displayed.

● Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA/AAC

title.

∗ The factory default setting is “ON”.

2-1. Select “SCROLL”.

3-1. Turn the [UP/DOWN] knob to select “ON”

or “OFF”.

•ON:

To scroll automatically.

• OFF:

To scroll just 1 time.

∗ When you want to see the title again, in the

title mode, press and hold the [DISPLAY]

button for 3 seconds or longer to scroll the

title.

● Setting the dimmer control

You can set the dimmer control “ON” or “OFF”.

∗ The factory default setting is “ON”.

2-1. Select “DIMMER”.

3-1. Turn the [UP/DOWN] knob to select “ON”

or “OFF”.

● Setting the speaker output for cell

phones

When the rear AUX1 input terminals is used to

connect an AUX BLUETOOTH BB (BLT370)

(sold separately):

∗ The factory default setting is “RIGHT”.

∗ To output the telephone calls, set cell phone

interrupt to “ON”.

2-1. Select “TEL-SP”.

3-1. Turn the [UP/DOWN] knob to select

“RIGHT” or “LEFT”.

•RIGHT: Telephone calls can be heard on

the front right speaker connected to this

unit.

To change adjustment setting

1. Press the [ADJUST] button to switch to

the adjustment selection display.

2. Press the [X] or [V] button to select the

“item name”.

“CLOCK” ↔ “CONTRAST” ↔

“SETTINGS” ↔ “SCROLL” ↔

“DIMMER” ↔ “TEL-SP” ↔ “TEL-SW” ↔

“RESET” ↔ “SYSTEM CHECK”

3. Turn the [UP/DOWN] knob to select the

“desired setting value”.

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

4. After completing settings, press the

[ADJUST] or [RETURN] button to return to

the previous mode.

For example: after 1 second,

CMD6_ENG.book Page 23 Friday, February 20, 2009 10:51 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMD6 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CMD6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info