Bedienungsanleitung Clarion CMD8 (Seite 8 von 19) (Englisch)

580502

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

English

CMD8

System Setup

SCRN SVR: ON/OFF

Rotate the [UP/DOWN] knob to choose

SCRN SVR (screen saver) ON or OFF.

SCROLL: ON/OFF

For track information that is longer than the

display panel:

When SCOLL is ON, the LCD will scroll the

ID3 TAG information across the display, e.g.:

TRACK->FOLDER->FILE->ALBUM->TITLE-

>ARTIST->TRACK->...

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default

is TRACK, but user can adjust it to other

ID3 TAG information by pressing [DISPLAY]

button.

REAR/S-W

Rotate the [UP/DOWN] knob to choose

REAR or S-WOOFER (SUB-WOOFER).

SW PHASE

Rotate the [UP/DOWN] knob to choose

S UBW O OFE R p has e R E VERS E o r

NORMAL.

Pandora: ON/OFF

Select OFF if the Pandora application has

not been installed on your iPod touch or

iPhone.

DIMMER: ON/OFF

Rotate the [UP/DOWN] knob to choose

DIMMER ON or OFF.

• ON: LCD dimmer is active when small

light of vehicle is turned ON.

• OFF: LCD always maximum brightness

regardless of the vehicle small light.

CONTRAST

You can adjust the display contrast to match

the angle of installation of the unit.

* The factory default setting is “9”.

(Adjustment level: 1 to 10)

Rotate the [UP/DOWN] knob to adjust the

contrast.

To change adjustment setting

1. Press the [ADJUST] button to switch to

the adjustment selection display.

2. Press the [ ] or [ ] button to select the

“item name”.

CLOCK, DX/LO, SCRN SVR, SCROLL,

REAR/S-W, SW PHASE, Pan do ra ,

DIMMER, CONTRAST, BEEP, 12/24H,

RESET

3. Rotate the [UP/DOWN] knob to select the

“desired setting value”.

* In the case of display blinking “ENT”, you

can press the [ENTER] button to adjust

the setting value.

4. After completing settings, press the

[ADJUST] or [RETURN] button to return to

the previous mode.

CLOCK

1. Press the [ENTER] button.

2. Press the [

] or [ ] button to select the

hour or the minute.

3. Rotate the [UP/DOWN] knob to set the

correct time.

* The clock is displayed in 12-hour format

by default.

4. Press the [ENTER] button to store the time

into memory.

Note:

• You cannot s et  th e c lo ckwhenitis

displayedwith onlytheignition on. Ifyou

drainor removetheboat’sbatteryor take

out this unit, theclock is reset.While

setting the clock, ifanother button or

operationis selected, theclocksetmode

iscanceled.

DX/LO (RADIO mode)

Rotate the [UP/DOWN] knob to choose radio

local or distant at RADIO mode.

• LO: Only stations with strong signal can

be received.

• DX: Stations with strong and weak signals

can be received.

System Setup

Press the [AUDIO] button to enter sound effect

setting mode. First press shows current BEAT

EQ setting. Rotate the [UP/DOWN] knob to

changes BEAT EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

Rotate the [UP/DOWN] knob to changes

CUSTOM, and press the [ENTER] button, the

press [ ] or [ ] button to select it including:

BASS-G -> BASS-F -> BASS-Q -> MID-G ->

MID-F -> MID-Q -> TREBLE-G -> TREBLE-F

-> TREBLE-Q, rotate the [UP/DOWN] knob to

select a value.

BASS-G / MID-G / TREBLE-G: (-7)- (+7)

BASS-F: 50 / 100 / 200

BASS-Q: 0.7 / 1.0 / 1.4 / 2.0

MID-F: 500 /1K / 2K

MID-Q: 0.7 / 1.0 / 1.4 / 2.0

TREBLE-F: 5k / 10k / 15k

TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0

Audio Setup

Press the [AUDIO] button, then press [ ] or

[ ] button to select USER preset including:

BALANCE -> FADER -> M-B EX -> HPF

(high pass lter) -> LPF (low pass lter) ->

SUBW VOL (Subwoofer Volume), rotate the

[UP/DOWN] knob to select a value.

BALANCE: LEFT 1-7 -> CENTER -> RIGHT

1-7

FADER: FRONT 1-7 -> CENTER -> REAR

1-7

M-BEX: ON / OFF

HPF: THROUGH / 60 / 90 / 120

LPF: THROUGH / 60 / 90 / 120

SUBW VOL: (-6) - (+6)

BEEP: ON/OFF

Rotate the [UP/DOWN] knob to choose button

beep sound ON or OFF.

12/24H

Rotate the [UP/DOWN] knob to choose time

format: 12 HOURS or 24 HOURS.

RESET

Long press [ ENTER ] button. Settings will

be set to the default value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMD8 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info