Bedienungsanleitung Clarion CMV1 (Seite 13 von 44) (Englisch)

580505

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

CMV1

English

Setting/Ejecting a Disc

Notes on handling discs

Handling

• New discs may have some roughness around

the edges. If such discs are used, the player

may not work or the sound may skip. Use a

ball-point pen or the like to remove any

roughness from the edge of the disc.

• Never stick labels on the surface of the disc or

mark the surface with a pencil or pen.

• Never play a disc with any cellophane tape or

other glue on it or with peeling off marks. If you

y to play such a disc, you may not be able to

get it back out of the DVD player or it may

damage the DVD player.

•Do not use discs that have large scratches, are

misshapen, cracked, etc. Use of such discs

may cause misoperation or damage.

•To remove a disc from its storage case, press

down on the center of the case and lif

t the disc

out, holding it carefully by the edges.

• Do not use commercially available disc

protection sheets or discs equipped with

stabilizers, etc. These may damage the disc or

cause breakdown of the internal mechanism.

Storage

• Do not expose discs to direct sunlight or any

heat source.

• Do not expose discs to excess humidity or

dust.

• Do not expose discs to direct heat from

heaters.

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the center

of the disc to the circumference.

• Do not use any solvents, such as commercially

available cleaners, anti-static spray, or thinner

to clean discs.

• After using special disc cleaner, let the disc dry

off well before playing it.

Setting a disc

Loading a disc

1. Press the [OPEN] button to access the disc

SLOT behind the front panel.

2. Insert a disc into the center of the disc SLOT

with the labeled side facing up. The disc

plays automatically after loading.

3. Close the front panel.

* Press the center of the front panel to close.

CAUTION

Be careful not to catch your hand or fingers while

closing the front panel.

Notes:

• If the front panel does not open fully, gently open

with your hand.

• After loading a disc, always close the front panel.

After setting a disc

The system will automatically be switched to the

relevant source media mode according to the

disc, and start playing back the disc.

When a DVD video disc is set:

The system is switched to the DVD Video mode.

See “DVD Video Operations” (page 16).

When a CD/DVD with CD/MP3/WMA/AAC/DivX

files is set:

The system is switched to the CD/MP3/WMA/

AAC mode or DivX mode according to the

Playform setting. See “CD/MP3/WMA/AAC

Operations” (page

22) or “DivX Operations”

(page 25).

Note:

• Never insert foreign objects into the disc insertion

slot.

• If the disc is not inserted easily, there may be

another disc in the mechanism or the unit may

require service.

• 8 cm (single play) discs cannot be used.

Ball-point pen

Roughness

280PE3260E_EN.book Page 11 Tuesday, March 24, 2009 3:41 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMV1 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CMV1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info